Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesThe PLA Marble filament by R3D imparts a remarkably authentic appearance of natural rock formations to the final printed products. To create a marble effect filament, different colors or materials are blended together to produce patterns or streaks resembling natural marble. This distinct visual effect not only enhances the realism but also amplifies the allure of various artistic applications. From crafting building models to setting up scenic landscapes and sculpting statues, the PLA Marble filament enriches these creations, imbuing them with a captivating and vivid realism.
PLA (polylactic acid) filament is renowned for its eco-friendly nature, derived from renewable resources like corn starch or sugarcane. This biodegradable filament showcases minimal warping during printing, making it ideal for use on 3D printers without a heated bed. Known for its ease of use, sustainability and versatility, PLA filament appeals to both hobbyists and professionals within the 3D printing community.
R3D is a brand founded in 2013 and one of the biggest filament manufacturers in the world with a daily output of more than 8000 kg. Their materials are high quality, reliable and environmentally friendly thanks to the spool and box made of recycled material.
Elongation at break (%) | 5 |
Tensile strength (MPa) | 35 |
The recommended printing temperature for the PLA Marble filament ranges between 190 and 210 ºC, and the best bed temperature is 0-60 ºC. The recommended printing speed is 50-70 mm/s.
Proper storage of the PLA Marble filament is essential, as processing damp filament can lead to polymer chain degradation, fragility, poor layer adhesion, stringing, and oozing. It's best to store the filament in a sealed bag with desiccant or in a vacuum-sealed filament container.
General Information | |
---|---|
Manufacturer | R3D |
Material | PLA |
Format | 1 kg spool |
Density | 1.21 g/cm³ |
Filament Diameter | 1.75 mm |
Diameter Tolerance | ±0.03 mm |
Filament Length | (Ø 1.75 mm, 1 kg) 340 m |
Color | - |
RAL/Pantone | - |
Printing Properties | |
Printing Temperature | 190-210 ºC |
Bed Temperature | 0-60 ºC |
Chamber Temperature | - |
Layer Fan | - |
Recommended Print Speed | 50-70 mm/s |
Drying Conditions | - |
Mechanical Properties | |
Izod Impact Strength | - |
Charpy Impact Strength | - |
Elongation at Break | 4.3-5.8 % |
Tensile Strength | 35 MPa |
Tensile Modulus | - |
Bending Strength | - |
Bending Modulus | - |
Surface Hardness | - |
Thermal Properties | |
Softening Temperature | - |
Melting Temperature | - |
Specific Properties | |
Transparency | - |
FDA Certification | - |
Additional Information | |
HS Code | 3916.9 |
Spool Diameter (external) | - |
Spool Diameter (inner hole) | - |
Spool Width | - |
* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design, and printing conditions. We advise confirming the results and final properties with your own tests. For more information, please refer to the product's technical datasheet.
22,95 €
24,95 €
14,01 €
24,79 €
18,40 €
34,90 €
16,45 €
32,90 €
28,92 €
33,05 €
41,28 €
37,15 €
35,50 €
33,02 €
28,92 €
28,92 €
28,92 €
46,75 €
40,65 €
40,65 €
40,65 €
34,95 €
34,95 €
34,95 €
34,95 €
34,95 €
44,00 €
24,75 €
32,97 €
39,90 €