Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesThe PLA Matte filament by R3D offers exceptional printing capabilities with its low shrinkage and resistance to edge warping and cracking, enabling the creation of large-scale models effortlessly. Beyond its technical advantages, this filament ensures a pleasant printing experience by emitting no pungent odor, promoting a safe and eco-friendly environment, aligning with sustainable 3D printing practices. Moreover, its matte surface effect delivers a refined finish devoid of any lamination, elevating the quality of printed objects by imparting a smooth and elegant texture.
PLA (polylactic acid) filament is renowned for its eco-friendly nature, derived from renewable resources like corn starch or sugarcane. This biodegradable filament showcases minimal warping during printing, making it ideal for use on 3D printers without a heated bed. Known for its ease of use, sustainability and versatility, PLA filament appeals to both hobbyists and professionals within the 3D printing community.
R3D is a brand founded in 2013 and one of the biggest filament manufacturers in the world with a daily output of more than 8000 kg. Their materials are high quality, reliable and environmentally friendly thanks to the spool and box made of recycled material.
Elongation at break (%) | 275 |
The recommended printing temperature for the PLA Matte filament ranges between 190 and 215 ºC, and the best bed temperature is 0-60 ºC. The recommended printing speed is 50-70 mm/s.
Proper storage of the PLA Matte filament is essential, as processing damp filament can lead to polymer chain degradation, fragility, poor layer adhesion, stringing, and oozing. It's best to store the filament in a sealed bag with desiccant or in a vacuum-sealed filament container.
General Information | |
---|---|
Manufacturer | R3D |
Material | PLA |
Format | 1 kg spool |
Density | 1.28 g/cm³ |
Filament Diameter | 1.75 mm |
Diameter Tolerance | ±0.03 mm |
Filament Length | (Ø 1.75 mm, 1 kg) 324.8 m |
Color | White, terracotta, pink, Warm Grey, Olive Green, Navy Blue, Kraft, Ash Grey |
RAL/Pantone | - |
Printing Properties | |
Printing Temperature | 190-215 ºC |
Bed/Build Plate Temperature | 0-60 ºC |
Chamber Temperature | - |
Layer Fan | - |
Recommended Printing Speed | 50-70 mm/s |
Drying Conditions | - |
Mechanical Properties | |
Izod Impact Strength | - |
Charpy Impact Strength | - |
Elongation at Break | 275% |
Tensile Strength | 31 MPa |
Tensile Modulus | - |
Bending Strength | - |
Bending Modulus | - |
Surface Hardness | - |
Thermal Properties | |
Softening Temperature | - |
Melting Temperature | 160-180 ºC |
Specific Properties | |
Transparency | - |
FDA Certification | - |
Additional Information | |
HS Code | 3916.9 |
Spool Diameter (outer) | - |
Spool Diameter (inner hole) | - |
Spool Width | - |
* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design, and printing conditions. We advise confirming results and final properties with your own tests. For more information, please refer to the product's technical datasheet.
22,95 €
24,95 €
14,01 €
24,79 €
18,40 €
34,90 €
16,45 €
32,90 €
28,92 €
33,05 €
41,28 €
37,15 €
35,50 €
33,02 €
28,92 €
28,92 €
28,92 €
46,75 €
40,65 €
40,65 €
40,65 €
34,95 €
34,95 €
34,95 €
34,95 €
34,95 €
44,00 €
24,75 €
32,97 €
39,90 €