Cart
0
Product
Products
empty
No products
To be determined
Shipping
0,00 €
Tax
0,00 €
Total
Product successfully added to your cart
0 products in the cart 1 product in the cart
Quantity:
Tips
Our experience in 3D printing allows us to have a wide knowledge about the different technologies and printing materials. In our blog you can find tips and good practices to extract all their potential.
FDM 3D printing construction volume
There is a popular belief that the larger the build volume of an FDM printer the better. However, a closer look at this reveals certain drawbacks that can tip the balance in favour of small format printers.
How to choose the correct hotend
Currently there are several hotel options on the market, as well as different spare parts and accessories for each of them. With so many options, it can be difficult to select and configure the most suitable option for each user or application. In this post we explain what a hotend consists of and how to select the most suitable one.
How to improve low-end FDM 3D printers
In general, most people start in the world of 3D printing through low-end economic printers. Despite the fact that some of these printers are good value for money, they have certain limitations, especially when using more advanced or technical materials. In this post we tell you how to improve these printers in order to give them advanced use and continue to delve into the world of 3D printing.
Direct extrusion and Bowden systems
Two of the most important components of a FDM 3D printer are the extruder and the hotend. There are two types of FDM 3D printers depending on how these two elements are located: Direct extrusion systems and Bowden systems. In this article we explain what each one consists of and how to decide which is the ideal for each user.
How to make a 3D printed lithophane
A lithophane is a three-dimensional image with different thicknesses that cause the opacity of each of its parts to vary by projecting light on it, achieving a very showy and original result. 3D printing makes this technique much more accessible, and allows you to easily create a lithophane.
The importance of the layer fan
When talking about the functional parts of an FDM 3D printer, the layer fan is one of the most important components that can be found. A 3D printer usually has two fans in the HotEnd area, one in charge of cooling the HotEnd diffuser and another that cools the material that comes out of the nozzle. In this article we will talk about the latter, the layer fan.
Common problems and solutions in 3D printing
When using 3D printers (FFF / FDM), problems and unforeseen events (especially in non-professional 3D printers) may occur when printing the models that the user needs. This causes nuisance, delays and other inconveniences that the user of the 3D printer does not want to happen. Thus, this article proceeds to give a series of tips to solve these typical problems.
How to create a 3D printing profile
In 3D printing there is always a series of factors that depend on the user, which often cause a print to be satisfactory or failed. All factors are collected in the print profile that each user uses in each 3D print.
Categories
Popular Articles
-
Common problems and solutions in 3D printing ene 15, 2020 -
What is the flow of 3D printing and how to adjust it dic 13, 2017 -
-
What is PETG? ene 16, 2019 -
PETG vs ABS vs ASA feb 04, 2019
