Natural PLA Basic spool 1Kg

New product

19 Items

16,45 €
16,45 €

Ask for information

With Basic PLA filament you will get print 3D parts with complex shapes and in an easy way.

Natural Basic PLA filament (1.75mm or 3mm) is a European filament made for 3D printers with NatureWorks INGEO 3D850 material with improved properties. The 1kg spools of PLA Basic Natural (1.75mm or 3mm) are compatible with multiple types of 3D printers. PLA is a biodegradable plastic that is obtained from natural resources, specifically obtained from the starch extracted from corn, beets and wheat. With the Natural Basic PLA INGEO 3D850 you can realize pieces with mechanical properties very close to those of the ABS with the advantage that it does not suffer warping and it is not necessary to provide a 3D printer with hot bed. In addition, this new NatureWorks INGEO 3D850 raw material has a higher temperature resistance than the standard 4032D PLA as it supports up to 85 °C instead of 55 °C. On the other hand, this new PLA Basic INGEO 3D850 crystallizes at a faster speed, which allows the printing speed to be increased by up to 50% and to obtain a better printing resolution with respect to other materials.

Natural PLA Basic (1,75mm or 3mm) is one of the most widely used 3D printing today because no apparent damaging gases because it is not necessary to have a 3D printer with hot bed base which makes it very easy to print materials with him. If you are interested in learning more about this material you can read more on this link.

Natural PLA Basic (1,75mm or 3mm) is the easiest material 3D printers for print on FDM/FFF Technology. With Natural PLA Basic (1,75mm or 3mm) you can get brighter figures than using the ABS while this is stiffer and stronger. In addition Natural PLA Basic (1,75mm or 3mm) filament is a permanent, odourless polymer. The extrusion temperature to print with this Natural PLA Basic (1,75mm or 3mm) must be between 190 and 220 ºC. In a tab usage tips you can view more interesting information for optimal results using Natural PLA Basic (1,75mm or 3mm) on your 3D printer.

Can´t drill, paint or sanding as the ABS but is a more stable and easier to print plastic this. If you wish to obtain special surface finishes in Natural PLA Basic (1,75mm or 3mm) use coating designed specifically for 3D printing you'll find in the accessories category called XTC-3D. For higher yields of 3D printing is advisable to cover the bed of the printer with Blue TapeBuildTak, or 3DLac you can find in the store fixtures.

3D printing with PLA is simpler and easier than with ABS. It is not necessary that the printer dock is hot, but if possible it is recommended that the base is approximately 50-60 ºC, to prevent any small sign of "warping" appears. The extruder temperature must be between 190 and 220 ºC depending on the colour and 3D printer used. If your printer has a fan nozzle is recommended that you enable it for best results In the article from our blog of 3D printing is explained about the main doubts of 3D printing with PLA and ABS.


If you need to print very thin and tall pieces, you will see that the PLA plastic does not give you enough time to harden each layer, so that the piece will be as if it had melted. To solve this problem we give a very simple advice, printed at the same time at least 2 pieces, and place them in separate base. So while the extruder is moved from one piece to another, the plastic has time to harden each layer in achieving a better result.


The adhesion of the first layer is key and probably the most important factors for goods prints. So you can use Blue TapeBuildTak or 3DLac.

It is also advisable to set the "raft" which is to create a first thick layer, and supports that will not suffer that contraction and on which is printed the piece. The disadvantage of using the "raft" is that this first layer will have a less smooth.
It is advisable to lower the density of "infill" parameter for the part to store less heat. As for the "brim" (the membrane that is created around the part) parameter is recommended never fit in greater thicknesses of 5mm to help the first layer does not come off.



As for the interior temperature where printed is recommended to be controlled and no drafts.


  • Plastic Type: PLA INGEO 3D850 Natureworks (diameter 1.75mm) // PLA INGEO 4032D Natureworks (diameter 3mm)

  • Place of manufacture: Europe, with the most sophisticated current manufacturing technologies.

  • Colour: Natural

  • Transparency: 75% opaque

  • Diameter: 1,75mm or 3mm

  • Tolerance (maximum) diameter: ± 0.10mm

  • Melting point: 175°C

  • Nozzle temperature: 190-220ºC

  • Print base temperature: 0-60ºC

  • Softening temperature: 85-90 °C (with annealing treatment can withstand 110 ° C)

  • Quantity: Spool of 1kg(2.3lb) of very high quality, sealed with silica gel bag for control humidity.

  • Spool diameter: 200mm (diameter 1.75mm) / 160mm (diameter 3mm)

  • Spool Width: 70mm (diameter 1.75mm) / 100mm (diameter 3mm)

  • Inner hole diameter: 53mm (diameter 1.75mm) / 40mm (diameter 3mm)

  • Shipping Weight: 1.2Kg

  • Ships Dimensions: 200x200x100mm

  • HS Code: 3916.9

13 other products in the same category: