• $options.id_post:
  • $options.slug:
  • https://filament2print.com/gb/blog/_.html
  • es
  • gb
  • pt
  • fr
  • Pink PLA Basic spool 1Kg

    New product

    10 Items

    16,45 €tax excl.
    19,90 €tax incl.

    Ask for information

    With pink PLA Basic filament you will be able to print complex shapes easily.

    Pink PLA Basic (1,75mm or 3mm) filament is manufactured in Europe for 3D printers. Spool 1kg(2.3lb) Pink PLA Basic (1,75mm or 3mm) support multiple types of 3D printers. PLA is a biodegradable plastic that is obtained from natural resources, in particular is obtained from the extracted starch from corn, sugar beet and wheat.

    Pink PLA Basic (1,75mm or 3mm) is one of the most widely used 3D printing today because no apparent damaging gases because it is not necessary to have a 3D printer with hot bed base which makes it very easy to print materials with him. If you are interested in learning more about this material you can read more on this link.

    Pink PLA Basic (1,75mm or 3mm) is the easiest material 3D printers for print on FDM/FFF Technology. With Pink PLA Basic (1,75mm or 3mm) you can get brighter figures than using the ABS while this is stiffer and stronger. In addition Pink PLA Basic (1,75mm or 3mm) filament is a permanent, odourless polymer. The extrusion temperature to print with this Pink PLA Basic (1,75mm or 3mm) must be between 190 and 220 ºC. In a tab usage tips you can view more interesting information for optimal results using Pink PLA Basic (1,75mm or 3mm) on your 3D printer.

    Can´t drill, paint or sanding as the ABS but is a more stable and easier to print plastic this. If you wish to obtain special surface finishes in Pink PLA Basic (1,75mm or 3mm) use coating designed specifically for 3D printing you'll find in the accessories category called XTC-3D. For higher yields of 3D printing is advisable to cover the bed of the printer with Blue TapeBuildTakMagigoo or 3DLac you can find in the store fixtures.

    Impact strength (KJ/m2) 11.8
    Elongation at break (%) 3.31
    Tensile strength (MPa) 50
    Tensile modulus (MPa) 2315
    Softening temperature (ºC) 65
    Biodegradable Biodegradable

    3D printing with PLA is simpler and easier than with ABS. It is not necessary that the printer dock is hot, but if possible it is recommended that the base is approximately 50-60 ºC, to prevent any small sign of "warping" appears. The extruder temperature must be between 190 and 220 ºC depending on the colour and 3D printer used. If your printer has a fan nozzle is recommended that you enable it for best results In the article from our blog of 3D printing is explained about the main doubts of 3D printing with PLA and ABS.

    If you need to print very thin and tall pieces, you will see that the PLA plastic does not give you enough time to harden each layer, so that the piece will be as if it had melted. To solve this problem we give a very simple advice, printed at the same time at least 2 pieces, and place them in separate base. So while the extruder is moved from one piece to another, the plastic has time to harden each layer in achieving a better result.

    The adhesion of the first layer is key and probably the most important factors for goods prints. So you can use Blue TapeBuildTak, Magigoo or 3DLac.

    It is also advisable to set the "raft" which is to create a first thick layer, and supports that will not suffer that contraction and on which is printed the piece. The disadvantage of using the "raft" is that this first layer will have a less smooth.
    It is advisable to lower the density of "infill" parameter for the part to store less heat. As for the "brim" (the membrane that is created around the part) parameter is recommended never fit in greater thicknesses of 5mm to help the first layer does not come off.

    As for the interior temperature where printed is recommended to be controlled and no drafts.

    General information
    Manufacturing Europe
    Material PLA INGEO 3D850 Natureworks (Ø 1.75mm)
    PLA INGEO 4032D Natureworks (Ø 2.85mm)
    Format Spool of 1 kg (2.3lb)
    Density 1.24 g/cm3
    Diameter of filament 1.75 or 2.85 mm
    Diameter tolerance ±0,05 mm
    Filament length ±335 m (Ø 1.75 mm)
    ±110 m (Ø 2.85 mm)
    Color Pink
    RAL/Pantone (approximate) RAL 3017
    Print settings
    Printing temperature 190-220ºC
    Print bed temperature 20-60ºC
    Chamber temperature Not necessary
    Cooling fan Recommended
    Mechanical properties
    Izod impact strength (ASTM D256) 118 J/m
    Charpy impact strength -
    Elongation at break (ASTM D638) 3.31 % 
    Tensile strength (ASTM D638) 50 MPa 
    Tensile Modulus (ASTM D638) 2315 MPa 
    Flexural strength -
    Flexural modulus -
    Surface hardness -
    Thermal properties
    Softening temperature (ASTM E2092) 80-90ºC 
    Melting temperature 175ºC
    Specific properties
    Transparency  75% opacity
    Additional Information
    HS Code 3916.9
    Diameter coil (outer) 200 mm (Ø 1.75mm)
    160 mm (Ø 2.85mm)
    Diameter coil (inner hole) 53 mm (Ø 1.75mm)
    40 mm (Ø 2.85mm)
    Coil Width 70 mm (Ø 1.75mm)
    100 mm (Ø 2.85mm)

    * The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.

    12 other products in the same category: