Hyper Speed ABS V2 Raise3D natural
search
  • Hyper Speed ABS V2 Raise3D black
  • Hyper Speed ABS V2 Raise3D natural
  • Hyper Speed ABS V2 Raise3D grey
Compare
You must be logged in to manage your wishlist.

Hyper Speed ABS V2 Raise3D

RAISE-ABSV2-HYPER-NATUR-175-1000
36.00 € 36.00 €
Tax excl.
Diameter
Format
Colour
Quantity

In stock 31 units available for immediate shipping.
units available for shipping in 7 - 10 days Available for shipment within 7 - 10 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 22 November
Available

Raise3D's Hyper Speed ABS V2 filament is an exceptional addition to the brand's Hyper Speed filament portfolio and an improved version of the Hyper Speed ABS filament. It must be kept in mind that in order to extrude with the Hyper Speed ABS V2 filamet at speeds of over 150 mm/s, it is necessary to use the Pro 3 or Pro 3 Plus 3D printers with the Hyper Speed Upgrade Kit installed and the Hyper Speed Mode in ideaMaker set (the most recent version ideaMaker 4.4.3 Alpha must be installed).

Parts 3D printed with Hyper Speed ABS V2 in natural and black

Image 1: Parts 3D printed with Hyper Speed ABS V2 in natural and black. Source: Raise3D.

Designed to address the limitations of regular ABS filaments at high speeds, the Hyper Speed ABS V2 filament mitigates nozzle clogging and subpar layer bonding caused by the rapid transition from solid to molten states. Unlike its predecessors, this innovative filament boasts optimized molecular weight and stiffness, enabling unparalleled printing speeds of up to 300 mm/s.

The properties of the Hyper Speed ABS V2 filament

Image 2: The properties of the Hyper Speed ABS V2 filament. Source: Raise3D.

Thanks to its advanced formulation, the Hyper Speed ABS V2 filament ensures faster melting and uniform cooling, minimizing temperature gradients and inner stress in printed parts. With enhanced heat resistance of up to 77 ºC at 0.45 MPa, it surpasses the capabilities of other ABS filaments.

Part 3D printed with Hyper Speed ABS V2 in grey

Image 3: Part 3D printed with Hyper Speed ABS V2 in grey. Source: Raise3D.

The Hyper Speed ABS V2 filament means no more warping or compromised layer bonding. This material not only delivers superior printing performance but also caters to a spectrum of applications, including functional prototyping, jigs, fixtures, manufacturing aids, end-use parts, and enclosures with remarkable impact resistance and dimensional stability. Moreover, 3D prints from this filament can be post-processed via polishing or acetone vapor smoothing.

General information
Material ABS
Format 1 kg
Density 1.04 g/cm³
Filament diameter 1.75 mm
Filament tolerance - mm
Filament length ±399.8 m
RAL/Pantone Natural (RAL 9016) / Grey (RAL 7045) / Black (RAL 7021)

Mechanical properties
Izod impact strength (ISO 180) 16.1 ± 0.9 KJ/m²
Elongation at break (ISO 527) (XY) 7.63 ± 3.3 % / (Z) 1.38 ± 0.03 %
Tensile strength (ISO 527) (XY) 26 ± 2 MPa / (Z) 23 ± 3 MPa
Tensile modulus (ISO 527) (XY) 2040 ± 58 MPa / (Z) 2051 ± 82 MPa
Flexural strength (ISO 178) (XY) 2072 ± 35 MPa
Flexural modulus (ISO 178) (XY) 44 ± 2 MPa
Surface hardness -

Printing properties
Printing temperature 210-260 ºC
Print bed temperature 55-65 ºC
Chamber temperature -
Cooling fan ✓
Recommended printing speed 25-300 mm/s

Thermal properties
Softening temperature - ºC

Specific properties
Transparency ✗

Other
HS Code 3916.9
Spool diameter (outer) - mm
Spool diameter (inner hole) - mm
Spool width - mm

This filament should be dried at 50 °C for approximately 8 hours before printing in a filament dryer. Despite the low moisture absorption properties of this filament, it should be stored properly, preferably in a vacuum sealed container or in a sealed bag with a desiccant capsule until use or in a drying case, such as the Fiber Three drying case.

It is recommended to print the Raise3D Hyper Speed ABS V2 at a temperature of 210-260 °C at 25-300 mm/s, on a bed heated to 55-65 °C with the layer fan on. To print in the 150-300 mm/s range, it is necessary to install the Hyper Speed Upgrade Kit. For better bed adhesion and less chance of part warpage, adding a brim or raft is recommended.

ideaMaker print profiles for Hyper Speed ABS V2 filament are available on the ideaMaker website.

Featured properties

Printing temperature
210-260 ºC
Filament diameter
1.75 mm
High speed compatible
Yes
Density
1,04 g/cm³

Related products