ABS Premium Raise3D

Raise3D

New product

14 Items

29,99 €
29,99 €

Ask for information

High quality ABS filament, tested for optimal 3D printing with Raise 3D printers.

Raise3D is one of the leading manufacturers of 3D FDM printers and accessories. Since its inception, it has been committed to offering high quality 3D printers, with innovative components and operating systems, always maintaining an adequate sale price for most professional users.

Currently it offers a wide catalog of high quality filaments: PLA, ABS, ASA, PC, PETG and PVA.

ABS is a plastic formed from acrylonitrile, butadiene and styrene. It is called engineering plastic because it is a material with superior mechanical and thermal properties than conventional plastics, which also implies greater printing difficulties.

Due to its composition, ABS has the following properties:

  • Acrylonitrile provides hardness, resistance to high temperatures, resistance to chemical products and rigidity.
  • Butadiene offers temperature toughness, especially when it is low and resistance to impact.
  • Styrene provides more rigidity and mechanical strength.

The combination of these three blocks makes ABS a widely used plastic in industrial sectors such as the automobile or in products in common use (toys, electrical appliance housings, etc.). As a consequence of its widespread use in the industry, this material was one of the first to be used in 3D printing together with PLA.

Contrary to PLA, ABS can be easily post-processed: machining, polishing, drilling, gluing or painting with ease and without the need for special tools or products.

ABS Premium Raise 3D Filament has been designed and developed with the aim of offering the highest quality and excellent compatibility with Raise 3D printers. To do this, the material is tested by the manufacturer until it finds the parameters that best fit to achieve an optimal impression.

Raise 3D has developed a lamination software, Idea Maker, in which it includes a series of predefined settings for different materials, based on the data obtained in its tests. These presets include the one for Raise 3D Premium ABS; which greatly facilitates and speeds up the printing process.

A part 3D printed with ABS Premium

Image 1: A part 3D printed with ABS Premium. Source: Raise3D.

Raise 3D ABS Premium is available in 750 g spools in 1.75 mm diameter only. The spools are shipped in a vacuum bag in a cardboard box. In this way, the material is kept free of moisture to ensure optimal printing.

The Hyper Speed Upgrade Kit for the Pro 3 series

Image 2: The Hyper Speed Upgrade Kit for the Pro 3 series. Source: Raise3D.

If the ABS Premium filament is 3D printed on the Pro 3 or Pro 3 Plus printer with the Hyper Speed Upgrade Kit (HUK3) installed, the printing speed can be upgraded to up to 150 mm/s. Furthermore, Raise3D has a line of Hyper Speed filaments especially developed to be used with the Hyper Speed Upgrade Kit, among them the Hyper Speed ABS which allows printing speeds of up to 300 mm/s.

Impact strength (KJ/m2) 12.6
Elongation at break (%) 2.7
Tensile strength (MPa) 33.3
Tensile modulus (MPa) 2174
Flexural strength (MPa) 59
Flexural modulus (MPa) 1339
Softening temperature (ºC) 100
Hide color variations (Hide color variations)

3D printing with Raise 3D Premium ABS is slightly more complex than with PLA Premium filament. In the case of ABS Premium filament, it is necessary that the printing base is hot, between 80 and 100ºC. In addition, the extruder temperature must be between 220 and 240ºC. It should also be remembered that this material suffers from the phenomenon called "warping", which causes the first layer of parts to peel off from the base of the 3D printer. For this reason, it is recommended to use BuildTak, Kapton Tape, Magigoo or DimaFix especially when printing large pieces, so that they do not tend to detach from the base.

As for the temperature of the cabin where it is going to print, it is recommended that it be controlled and that there are no drafts. For this reason, if printing with Raise 3D printers of the Pro range, it must be printed with the top cover to keep the camera temperature stable.

Finally, this material should be printed in a well-ventilated room, as the vapors that are released during printing with Premium ABS filament are not entirely healthy.

General information
Manufacturer Raise 3D
Material ABS
Format Spool of 1 kg
Density 1.10 g/cm3
Diameter of filament 1.75
Diameter tolerance -
Filament length ±381 m
Color Black, white, grey
RAL/Pantone -
Print settings
Printing temperature 240 - 260ºC
Print bed temperature 80 - 100ºC
Chamber temperature Not necessary
Cooling fan Not recommended
Recommended printing speed 40 - 60 mm/s
< 150 mm/s with the HUK3
Mechanical properties
Izod impact strength (ASTM D256) 12.6 J/m
Charpy impact strength -
Elongation at break (ASTM D702) 2.7% 
Tensile strength (ASTM D702) 33.3 MPa 
Tensile Modulus (ASTM D702) 2174 MPa 
Flexural strength (ASTM D790) 59 MPa
Flexural modulus (ASTM D790) 1339 MPa
Surface hardness  -
Thermal properties
Softening temperature (ASTM E2092) 100 - 110ºC 
Melting temperature -
Additional Information
HS Code 3916.9
Diameter coil (outer) -
Diameter coil (inner hole) -
Coil Width


* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.

Accessories

30 other products in the same category: