Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesThe PolyFlex TPU90 filament is one of the flexible materials created by Polymaker, engineered to provide high flexibility without compromising the printability. The extrusion of flexible filaments tends to be problematic but with the PolyFlex filaments this is not the case. With proper settings and a direct drive extruder, PolyFlex TPU90 offers excellent layer adhesion, no bubbles, no clogging and no deformation and is easier to print than similar flexible material thank to its high melt index.
Parts 3D printed with the PolyFlex TPU90 filament resemble tough rubber and can stretch more than 6 times their original length before breaking. Furthermore, PolyFlex TPU90 has the ability to resist ultraviolet (UV) light or sunlight so it is perfect for the printing of parts that are not only extremely flexible and durable but can be used outdoors without risking decoloration or material degradation.
Thanks to its excellent mechanical properties and its UV resistance, parts 3D printed with the PolyFlex TPU90 filament can be used for making customer goods (protective covers for portable devices, watch straps), footwear (insoles, soles), vehicle parts (rubber bike parts, drone parts) and various industrial components (seals, plugs, gaskets, blades).
Elongation at break (%) | 600 |
Tensile strength (MPa) | 30 |
Tensile modulus (MPa) | 6 |
Surface hardness | 5 |
Flexibility | Flexibility |
UV resistance | UV resistance |
The PolyFlex TPU90 filament is delivered in a vacuum sealed bag with desiccant. Once opened, the filament should be stored properly to prevent it from absorbing moisture from the air. The best way to store filaments in a tightly sealed bag with desiccant, in a vacuum sealed container or in an intelligent filament container. During printing, the filament can be placed in PolyBox. If the PolyFlex TPU90 filament absorbs humidity, it should be dried before printing at 70 ºC for 12 hours in a filament dryer.
The manufacturer recommends printing PolyFlex TPU90 filament at 210-230 ºC on a bed heated to 25-60 ºC. It is recommended to print at a speed of 30-60 mm/s with the layer fan on. The best build surface for this filament is a glass surface with glue, Blue Tape or BuildTak. The recommended suppport material for PolyFlex TPU90 is PolyDissolve S1 or PolySupport.
It is highly recommended to wear standard safety equipment during the printing and post-processing of parts 3D printed with the PolyFlex TPU90 filament - safety goggles, gloves, breathing equipment and protective garments, according to needs.
General information | |
---|---|
Manufacturer | Polymaker |
Material | TPU |
Format | Spool of 750 g |
Density | 1.12 g/cm3 |
Filament diameter | 1.75 or 2.85 mm |
Diameter tolerance | ±0.05 mm |
Filament length | ± 278.4 m (Ø 1.75 mm-0.75Kg) ± 105.0 m (Ø 2.85 mm-0.75Kg) |
Colour | White Black Grey Blue green (teal) Clear |
RAL/Pantone | - |
Printing properties | |
Printing temperature | 210-230 ºC |
Base/bed temperature | 25-60 ºC |
Chamber temperature | - |
Layer fan | ✓ |
Print speed | 30-60 mm/s |
Nozzle diameter | - |
Mechanical properties | |
Izod impact resistance | - |
Charpy impact resistance | - |
Elongation at break (ISO 527) | XY: 638.8 ± 15.5 % |
Tensile strength (ISO 527) | XY: 12.1 ± 0.82 MPa |
Tensile modulus (ISO 527) | XY: 3.40 ± 0.42 MPa |
Bending strength | - |
Flexural modulus | - |
Surface hardness (ISO 7619-1) | Shore 90A |
Thermal properties | |
Softening temperature | - |
Melting temperature | - |
Specific properties | |
Transparency | ✗ |
Flammability | - |
Additional information | |
HS Code | 3916.9 |
Spool diameter (outside) | - |
Spool diameter (inner bore) | - |
Spool width | - |
* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.
66,10 €
145,00 €
35,95 €
24,71 €
69,84 €
29,95 €
42,98 €
79,99 €
27,48 €
28,10 €
19,42 €
53,00 €
130,00 €
43,00 €
84,90 €
41,28 €
95,00 €
170,00 €
190,00 €
75,00 €
75,00 €
95,00 €
95,00 €
110,00 €
105,00 €
95,00 €
32,95 €
36,95 €