Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

ASA-X CF10 Spectrum

Ref.: SPEC-ASAXCF10-BLACK-175-500

24.30 €

Tax excl.

Diameter

Format

Colour

Quantity

In stock 7 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Tuesday 26 November

Available

Returns

Ask about this product

The ASA-X CF10 filament was created by Spectrum Filaments as a response to the demand for a material that would guarantee the printed models consistently high mechanical performance (hardness and stiffness) even under prolonged use in outdoor weather conditions such as UV radiation, temperature and humidity.

Part 3D printed with the ASA-X CF10 filament

Image 1: Part 3D printed with the ASA-X CF10 filament. Source: Spectrum Filaments.

The base for ASA-X CF10 is ASA, a polymer well-known as a highly weather-resistant and easier to print alternative to ABS. Furthermore, ASA is characterized by great chemical resistance and mechanical robustness. This base of ASA is reinforced with 10 % of carbon fibers, which gives parts 3D printed with ASA-X CF10 a range of benefits:

Lower weight.
High thermal resistance (HDT A 95 ºC, VICAT 101.6 ºC).
Matte surface with less perceptible layer lines.
Better printability (low shrinkage and warping, great intralayer bonding, printability on open desktop 3D printers).

There are many potential applications for the ASA-X CF10 filament. It can be used to manufacture functional prototypes, jigs and fixtures, housings and covers, parts subject to abrasive wear as well as components that need high resistance to outdoor exposure. The great printability of ASA-X CF10 makes it a very efficient material that can help reduce manufacturing costs in the long term and increase yield for production in series on a medium as well as large scale.

General information
Material	ASA
Format	0.5 kg
Density	1.10 g/cm³
Filament diameter	1.75 mm
Filament tolerance	±0.03 mm
Filament length	±189.0 m

Printing properties
Printing temperature	235 - 260 ºC
Print bed temperature	90 - 110 ºC
Chamber temperature	Not necessary
Cooling fan	0 - 20 %
Recommended printing speed	30 - 70 mm/s

Mechanical properties
Charpy impact strength	(ISO 179-1) notched: 5.4 kJ/m² / unnotched: 16.8 KJ/m²
Elongation at break	(ISO 527) 1.8 %
Tensile strength	(ISO 527) 79 MPa
Tensile modulus	7580 MPa
Flexural strength	- MPa
Flexural modulus	(ISO 527) 7580 MPa
Surface hardness	-

Thermal properties
Softening temperature	(ISO 306) 101.6 ºC

Other
HS Code	3916.9
Spool diameter (outer)	200 mm
Spool diameter (inner hole)	52 mm
Spool width	52 mm

Once opened, ASA-X CF10 filament must be stored properly to prevent it from absorbing moisture from the air. Filament is best stored in a hermetically sealed bag with desiccant, in a vacuum-sealed container or in a smart filament container.

The manufacturer recommends printing ASA-X CF10 filament at 235-260 °C on a bed heated to 90-110 °C. It is recommended to print at a speed of 30-70 mm/s with the layer fan on. In case of adhesion problems, products such as Magigoo, DimaFix or 3DLac can be applied to the printing bed.

Since the ASA-X CF10 filament contains carbon fibers, it is necessary to use an abrasion-resistant nozzle such as a hardened steel nozzle, a Vanadium nozzle, a tungsten carbide nozzle or a ruby tip nozzle, with a diameter of at least 0.4 mm.

It is strongly recommended to use standard safety equipment during printing and post-processing of 3D printed parts with ASA-X CF10 filament: safety goggles, gloves, breathing apparatus and protective clothing as required.