Find the most suitable 3D printer for your needs.
We guide you to find the best option according to your needs.
Find the most suitable 3D scanner for your needs.
Contact us and we'll get it for you.
Find the most suitable filament for each application.
Find the most suitable resin for each application.
Find the most suitable powder for each application.
Find the most suitable pellets for each application.
Find the accessory you need for your 3D printer.
Find the ideal accessories for your 3D prints.
Do you need more than 1 units? Please, contact us.
Product temporarily out of stock with these characteristics. Select another combination.
We notify you when it will be available:
Hyper Speed hotend Raise3D (Pro 3 series)
The Hyper Speed hotend was developed by Raise3D especially for the Hyper Speed printing mode for the Pro3 and Pro 3 Plus 3D printers. The Hyper Speed mode makes it possible to achieve higher printing speeds with the Raise3D Premium filaments (100-150 mm/s) and print at speeds of up to 300 mm/s with the Raise3D Hyper Speed filaments, Hyper Speed PLA and Hyper Speed ABS.
The Hyper Speed hotend comes with a 0.4 mm nozzle and is compatible with 1.75 mm filament. It must be kept in mind that the Hyper Speed mode will only work correctly on the Pro 3 series printers with the Hyper Speed autocalibrator installed. The absence of any of these components may result in printing failure.
The Hyper Speed hotend can also be purchased as part of the Hyper Speed Upgrade Kit.
It should be kept in mind that the Hyper Speed printing mode will only work correctly if the Hyper Speed hotends, the Hyper Speed autocalibrator, and the Hyper Speed filaments are installed on a Pro 3 series printer with the with Hyper Speed mode activated. The absence of any of these components may result in printing failure. The version of the ideaMaker software to be used with the Hyper Speed mode is ideaMaker 4.4.0 Alpha.
High-flowrate hotend designed for the Pro3 Series on Hyper Speed Mode.