Display Nav Left

Language:

Oyster PLA

Diameter: 1.75 mm

Format: Spool 750 g

Cantidad:

34.95 €

Confirmar

Compare

Oyster PLA

Name: Oyster PLA
Brand: Francofil
SKU: FRANCOFIL-OYSTER
Price: 34.95 EUR
Availability: InStock

SKU: FRANCOFIL-OYSTER-175-750

34.95 €

Tax excl.

Diameter: 1.75 mm

Format: Spool 750 g

Volume discounts

Buy 10 units

Save 10%

314.55 € Tax excl. Unit price 31.46 € 34.95 €

Buy 15 units

Save 12%

461.34 € Tax excl. Unit price 30.76 € 34.95 €

Quantity

In stock 7 units available for immediate shipping.
units available for shipping in 5 - 7 days Disponible a partir de Available for shipment within 5 - 7 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Tuesday 8 September

Returns

Ask about this product

Francofil, a French filament manufacturer, has developed and manufactured the PLA oyster filament.

This filament is part of a series of biocomposed filaments among which, in addition to PLA Oyster, we can find PLA Scallop, PLA mussel , PLA Wheat and PLA Coffee.

Vases printed with biocomposite filaments.

Image 1: Vases printed with biocomposite filaments. From left to right: PLA coffee, PLA wheat, PLA oyster, PLA mussel and PLA scallop. Source: Francofil.

All the filaments in Francofil's biocomposite material series have a PLA (polylactic acid) base, combined with a natural material filler. In this case, this filling is manufactured from oyster by-products. In other words, PLA oyster uses by-products and waste from the oyster and PLA to create a high quality biocomposite filament.

PLA is a biodegradable plastic obtained from natural resources. In particular, it is obtained from starch extracted from corn, beet and wheat. Together with ABS, PLA is one of the most widely used materials in 3D printing today.

As it has a PLA base, this filament maintains the mechanical properties and the ease of printing of this material. PLA Oyster does not require a hot bed, so it can be printed on almost any 3D FDM printer on the market. In addition, it does not give off harmful gases during the printing process.

Bio-composite products like the PLA Oyster, provide an alternative to those products derived from oil. In this case, natural waste is used, which gives new life to materials that would otherwise have no use.

Due to the particle content, it is recommended to use a nozzle with at least 0.5 mm outlet diameter to avoid possible clogging. By using a nozzle with a smaller output diameter, a jam could occur which would cause a print failure.

Filament and part printed with PLA Oyster.

Image 2: Filament and part printed with PLA Oyster. Source: Francofil.

The colour of this filament is given naturally by its filling with particles derived from the oyster. For this reason, the colour of the filament may vary from one batch to another, without implying any manufacturing defect. In addition, the 3D printing of this material offers unique and original print finishes. The colour of the material once printed is a whitish tone with small particles containing a certain brightness.

This surface finish is very interesting for applications in the art sector, design or decoration among others, as the texture and marbling provided by the particles of PLA oyster filament hide the lines of the layer and other possible defects of the pieces.

In addition to their characteristics and surface finish, one of the most outstanding features of Francofil's biocomposite filaments is that these materials have been developed as an alternative to others with a greater environmental impact. Sustainability is an increasingly important factor in various sectors, so these filaments are an option to take into account.

To read more about terms related to the environmental impact of materials, it is recommended to read the following article.

PLA oyster
Eco / Ecofriendly
Sustainable
Biodegradable
Compostable
Biocomposite
Recycling

Table 1: Oyster PLA filament characteristics.

For all these reasons, the PLA oyster filament is an ideal material for the development of artistic or decorative pieces, although it is also a recommended material for the manufacture of non-functional prototypes.

* In spite of being a biocomposite filament with a oyster content, this filament is not edible.

General information
Material	PLA
Format	50 g / 750 g
Density	(ASTM D792) 1.24 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	± 0.05 mm
Filament length	(Ø 1.75 mm 750 g) ±252 m / (Ø 2.85 mm 750 g) ±95 m / (Ø 1.75 mm 50 g) ±16.8 m / (Ø 2.85 mm 50 g) ±6.3 m

Printing properties
Printing temperature	190 - 210 ºC
Print bed temperature	✗
Chamber temperature	✗
Cooling fan	✓
Recommended printing speed	30 - 40 mm/s

Mechanical properties
Elongation at break	(ASTM D882) 6 %
Tensile strength	(ASTM D882) 53 MPa
Tensile modulus	(ASTM D882) 3612 MPa
Flexural strength	(ASTM D790) 83 MPa
Flexural modulus	(ASTM D790) 3826 MPa
Surface hardness	-
Impact strength	1.6 KJ/m²

Thermal properties
Melting temperature	(ASTM D3418) 145-160 ºC
Softening temperature	(ASTM E2092) 55 ºC

Specific properties
Transparency	-

Other
HS Code	3916.9
Spool diameter (outer)	200 mm
Spool diameter (inner hole)	55 mm
Spool width	50 mm

To use the oyster PLA filament, we recommend using a printing temperature of between 180 and 210 ºC. As with standard PLA, this material does not require a warm bed, so the temperature of the appropriate printing base would be between 40 and 60 ºC. For better adhesion, a Buildtak printing base or Magigoo adhesive can be used. This will avoid the warping effect even on large pieces.

As far as printing speed is concerned, it is recommended to print at a speed of between 40 and 60 mm/s. As usual, lower layer heights produce greater detail clarity, but the printing process will be slower.

Due to its particle load, it is recommended to use a nozzle with an outlet diameter of at least 0.5 mm to avoid clogging.

The oyster PLA filament is somewhat sensitive to moisture absorption, so it is recommended that the filament be kept in a vacuum pack with a desiccant bag or use a filament pack with a PrintDry vacuum seal. If you have been exposed to damp conditions, it is recommended that you use a filament dryer such as PrintDry II to dry the filament. Using the filament wet can cause degradation of the polymer, increase the brittleness of the material or affect the adhesion of layers when printing a 3D part.