PA0 Filkemp


New product

2 Items

42,72 €
42,72 €

Ask for information

User friendly low temperature nylon with low warping and low moisture absorption.

Filkemp holds a global leading position in the production of PETnylons and various combinations of special polymers and copolymers. The PA0 filament belongs to Filkemp's portfolio of technical filaments for specialized uses and is ideal for the purposes of industrial modeling and prototyping

This Filkemp nylon is a unique material since it is a low temperature PA developed to be extruded at 230 °C with rapid cooling. It uses the Filkemp Exclusive Lubricity Technology which allows for easy printing with no stoppages. In comparison with standard nylons available on the market, the Filkemp PA0 warps much less and is characterized by very low moisture absorption.

Another feature that makes the Filkemp nylon easy to use is that it extrudes odor-free and does not require predrying thanks to its low moisture absorption. This guarantees smooth extrusion and high quality parts. Apart from these features, the Filkemp PA0 filament is semi-flexible, durable and exhibits great impact resistance with high thermal durability. The 3D printed parts resemble those produced by Injection Molding.

Elongation at break (%) 271
Tensile strength (MPa) 25
Tensile modulus (MPa) 481
Flexural strength (MPa) 13
Flexural modulus (MPa) 260
Softening temperature (ºC) 149

The Filkemp PA0 filament should be extruded at a temperature of 225-235 ºC, without a heated bed or a layer fan. All Filkemp filaments are supplied in vacuum-sealed packaging containing a desiccant bag. Once removed from the original packaging, the PA0 filament should be stored properly in order to protect the material from humidity, and ensure its longevity and successful prints. A vacuum sealed bag with a filament drying capsule inside the spool is a good storage solution. The PA0 can also be stored in an intelligent filament container before and after printing, and in a filament drying case during printing.

General information
Manufacturer Filkemp
Material PA0
Format 1 kg spool
2.2 kg spool
Density -
Filament diameter 1.75 or 2.85 mm
Diameter tolerance ±0.10
Filament length -
Colour Clear
RAL/Pantone  -
Printing properties
Printing temperature 225-235 °C
Base/bed temperature -
Chamber temperature -
Layer fan -
Print speed -
Nozzle diameter -
Relleno recomendado -
Mechanical properties
Izod impact resistance (ISO 180) 7 ± 0.7 kJ/m(notched)
6.2 ± 1.3 kJ/m(unnotched)
Charpy impact resistance (ISO 179) 7.7 ± 1.4 kJ/m2
Elongation at break (ISO 527-1) 250 ± 21 %
Tensile strength (ISO 527-1) 24 ± 1 MPa
Tensile modulus (ISO 527-1) 453 ± 28 MPa
Flexural strength (ISO 178) 12 ± 1 MPa
Flexural modulus (ISO 178) 247 ± 13 MPa
Surface hardness (ISO 48) 6.8 ± 0.9
Thermal properties
Softening temperature (ISO 306) 144 ± 5 ºC
Melting temperature (ISO 11357) 210-220 ºC
Specific properties
Transparency -
Additional information
HS Code 3916.9
Spool diameter (outside) -
Spool diameter (inner bore) -
Reel width -

* The typical values listed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.

30 other products in the same category: