You must be logged in to manage your wishlist.
PET-G MATT Spectrum
SPEC-PETGMATT-WHITE-175-1000
30.00 €
Tax excl.
PETG, a material resulting from the glycolization of PET, is one of the most famous copolymers in 3D printing and the most used plastic in the world. Naturally, it has a shiny finish but Spectrum Filaments has developed PETG MATT - a PETG filament with its chemical composition modified to obtain a matte surface of the 3D printed object. The matte finish not only improves the aesthetic properties of the printed parts but also minimises the visibility of layers.
Image 1: PETG MATT vs. standard PETG. Source: Spectrum Filaments.
Despite its unique surface finish, PETG MATT preserves the qualities of PETG filaments such as UV stability, improved temperature resistance, good impact resistance as well as rigidity and low brittleness of the printed items.
Image 2: The PETG MATT color range. Source: Spectrum Filaments.
Furthermore, PETG MATT demonstrates a series of features that make it a very user-friendly material:
- Low shrinkage after cooling.
- Very good adhesion between layers.
- Great adhesion between the build platform and printed object.
Thanks to its revolutionary matte finish and a wide color range, the PETG MATT filament by Spectrum Filaments is ideal for aesthetic applications in industrial design for prototyping for concept visualisation, as well as for uses in interior design, architecture and education.
General information |
|
| Material | PETG |
| Format | 1 kg |
| Density | 1.35 g/cm³ |
| Filament diameter | 1.75 mm |
| Filament tolerance | ±0.03 mm |
| Filament length | ±308 m |
Printing properties |
|
| Printing temperature | 230 - 255 ºC |
| Print bed temperature | 60 - 80 ºC |
| Chamber temperature | Not necessary |
| Cooling fan | ✓ |
| Recommended printing speed | 30 - 70 mm/s |
Mechanical properties |
|
| Charpy impact strength | (ISO 179-1) notched: 3.5 kJ/m² / unnotched: 85 KJ/m² |
| Elongation at break | (ISO 527) 40 % |
| Tensile strength | (ISO 527) 30 MPa |
| Tensile modulus | 1500 MPa |
| Flexural strength | 55 MPa |
| Flexural modulus | (ISO 527) 3150 MPa |
| Surface hardness | - |
Thermal properties |
|
| Softening temperature | (ISO 306) 85 ºC |
Other |
|
| HS Code | 3916.9 |
| Spool diameter (outer) | 200 mm |
| Spool diameter (inner hole) | 52 mm |
| Spool width | 52 mm |
Once opened, PET-G MATT filament must be stored properly to prevent it from absorbing moisture from the air. Filament is best stored in a hermetically sealed bag with desiccant, in a vacuum-sealed container or in a smart filament container. During printing, the filament can be placed in a drying case.
The manufacturer recommends printing PET-G MATT filament at 230-255 °C on a bed heated to 60-80 °C. It is recommended to print at a speed of 30-70 mm/s with the layer fan on. In case of adhesion problems, products such as Magigoo or DimaFix can be applied to the substrate.
It is strongly recommended to use standard safety equipment during printing and post-processing of 3D printed parts with PET-G MATT filament: safety goggles, gloves, breathing apparatus and protective clothing as required.
Featured properties
Printing temperature
230 - 255 ºC
Filament diameter
1.75 mm
Related products
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
Easy to print PETG filament for resistant parts with a matte surface finish.