Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Filaflex 82A Purifier

Ref.: RECREUS-FFLEX-PURIF-175-500

37.11 €

Tax excl.

Diameter

Format

Colour

Quantity

In stock 5 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Monday 18 November

Available

Returns

Ask about this product

The Filaflex Purifier is a thermoplastic elastomer (TPE) filament capable of absorbing and purifying the environment, neutralising CO2, NOX and volatile organic compounds, converting these harmful particles into mineral gases.

This elastic TPE filament was developed by Recreus, a company specialised in the 3D printing sector, founded in 2011 and supported by Repsol to develop and innovate products for 3D printing.

TPE is a thermoplastic material combined with rubber and additives. Filaflex Purifier is an odourless thermoplastic elastomer-based filament with added silicon oxide, aluminium oxide, iron(III) oxide, iron(II) oxide, magnesium oxide, calcium oxide and titanium oxide. The addition of these compounds results in an elastic filament capable of purifying the air by reducing environmentally harmful particles and helping to reduce the greenhouse effect, as well as being a recyclable material that maintains all its properties after recycling.

3D printed part with Filaflex Purifier.

Image 1: 3D printed part with Filaflex Purifier. Source: Recreus.

Applications

Recreus Filaflex Purifier is a thermoplastic elastomer filament that maintains the characteristic quality of Filaflex filaments. With this new filament, elastic parts can be made that also purify the air that comes into contact with the material, absorbing particles of CO2, NOx and volatile organic compounds (VOCs).

One of the applications in which this filament could be implemented would be in the manufacture of air filters or parts that are in contact with the air in which the elasticity of the material is necessary.

Thus, with Recreus' new product, it is possible to create pieces that help to improve the environment and enhance the surroundings without losing the facilities and qualities provided by Recreus' Filaflex Purifier.

General information
Material	TPU/TPE
Format	50 g / 500 g
Density	(ISO 1183) 1.17 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	± 0.05 mm
Filament length	(Ø 1.75 mm-0.5 kg) ±177 m / (Ø 2.85 mm-0.5 kg) ±67 m

Printing properties
Printing temperature	215 - 250 ºC
Print bed temperature	50 ºC
Chamber temperature	-
Cooling fan	✓
Recommended printing speed	20 - 60 mm/s

Mechanical properties
Elongation at break	(DIN 53504-S2) 617 %
Tensile strength	(DIN 53504-S2) 43 MPa
Tensile modulus	(ISO 527) 20 MPa
Flexural strength	- MPa
Flexural modulus	- MPa
Surface hardness	(ISO 7619-1) Shore 82A
Impact strength	580 KJ/m²

Electrical properties
Volumetric resistivity	(IEC 62631-2-1) 1.00E+10 Ohm*m

Thermal properties
Melting temperature	220 ºC
Softening temperature	113 ºC

Specific properties
Transparency	-
Flammability classification	(UL94) HB

Other
HS Code	3916.9
Spool diameter (outer)	200 mm
Spool diameter (inner hole)	53 mm
Spool width	50 mm

When printing a flexible material, it must be taken into account that it can generate certain problems that we will try to solve and avoid in the following lines:

The easiest way to achieve to work this filament is with a direct extruder, since if we use a Bowden type system it is more complicated. In case of using a Bowden system, it is recommended to use a wire diameter of 2.85 mm to try to reduce the possibility of clogging. Another improvement that could be implemented would be the substitution of the guide tube for a PTFE tube such as the Capricorn XS, which would make the filament fit better, thus reducing friction.

Recreus recommends a printing temperature of 215 - 250 °C with a maximum speed of 60 mm/s. The brand itself indicates that a heated bed is not necessary for correct printing as it adheres well to the bed without the need for any additional adhesive. With regard to shrinkage, if jamming occurs in the extruder it should be deactivated and if printing at a speed of 40mm/s a shrinkage distance of 4 - 6mm is recommended. Finally, the manufacturer recommends to increase the flow if the printing is intermittent (between 105% - 115%) and to avoid filament throttling and clogging, the extruder pressure that presses the filament on the motor pulley should be reduced.

As the user gains experience with the Filaflex Purifier he can increase the speed and decrease the printing temperature to achieve a high quality finish. It is necessary to use a coating fan, as this material is quite liquid when it melts. As far as the layer height is concerned, it does not affect the adhesion between layers (ideally between 0.1 and 0.25 mm).

The last recommendation proposed would be the use of a filament dryer such as PrintDry Pro, as a filament that is in poor condition due to moisture absorption in addition to generating problems in the nozzle, would generate a loss in thermal and chemical resistance and creation of bubbles in the printed piece. Drying at a temperature of 50 °C for at least 4 h is recommended.