Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesNanovia's 22D TPE filament is a 22D Shore hardness material, which enables 3D printing of flexible parts with significant inter-layer adhesion.
TPE is also known as thermoplastic rubber. It is the result of mixing polymers, a plastic as a base and rubber as an alloy, resulting in a material with thermoplastic and elastomeric properties. TPE is much cheaper and easier to form than conventional silicones and rubbers because, unlike the above, TPE does not require long production times or specialised facilities.
Nanovia TPE 22D allows the creation of flexible parts, making it an ideal material for shock and vibration absorbing components. It is also very easy to print.
Its advantages include:
Finally, it is recommended to use a direct extruder when printing as it is a flexible filament.
To ensure good printing conditions, drying at 50 °C for 4 hours or more is necessary when the reels have been exposed to humidity for a prolonged period of time.
General information | |
---|---|
Manufacturer | Nanovia |
Material | TPE 22D |
Format | Spool of 500 g |
Density | 1.00 g/cm3 |
Diameter of filament | 1.75 o 2.85 mm |
Diameter tolerance | - |
Filament length | - |
Color | Translucid |
RAL/Pantone | - |
Print settings | |
Printing temperature | 220 – 240 °C |
Print bed temperature | 30 – 50 °C |
Chamber temperature | - |
Printing speed | 20 – 60 mm/s |
Mechanical properties | |
Izod impact strength | - |
Charpy impact strength | - |
Elongation at break | - |
Tensile strength | - |
Tensile Modulus (ISO 527-1) | 12 MPa |
Flexural strength | - |
Flexural modulus | - |
Surface hardness | 22 Shore D, 70 Shore A |
Thermal properties | |
Softening temperature - | - |
Melting temperature | - |
Specific properties | |
Transparency | - |
Additional Information | |
HS Code | 3916.9 |
Diameter coil (outer) | - |
Diameter coil (inner hole) | - |
Coil Width | - |
* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.
66,10 €
145,00 €
35,95 €
24,71 €
69,84 €
29,95 €
42,98 €
79,99 €
27,48 €
28,10 €
19,42 €
53,00 €
130,00 €
43,00 €
84,90 €
41,28 €
95,00 €
170,00 €
190,00 €
75,00 €
75,00 €
95,00 €
95,00 €
110,00 €
105,00 €
95,00 €
36,95 €
28,02 €