Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Smartfil TPU 93A

Ref.: TPU-SMF-93A-GREEN-175-750

21.90 €

Tax excl.

Diameter

Format

Colour

Quantity

In stock 4 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 15 November

Available

Returns

Ask about this product

Smartfil TPU 93A is a filament developed by SmartMaterials for all types of FDM 3D printers. Its main advantages are the combination of flexibility and elasticity, with great wear resistance.

This Thermoplastic Polyurethane is obtained thanks to modifying the Thermoplastic Elastomer (TPE), resulting in a filament with greater rigidity, compatible with most 3D FDM printers on the market, whether they have a direct extrusion or bowden system, being an advantage clear against TPE.

Smartfil TPU 93A is an ideal material for applications where flexibility, some elasticity and good adhesion between layers are needed so that the pieces withstand blows without breaking. Another advantage that it presents is the great resistance to abrasion and a smooth surface finish, which minimizes friction between elements in contact. Like FilaFlex, this material shows good chemical resistance in contact with greases, oils and solvents.

As is common in all SmartMaterials products, this filament is specifically developed so that 3D printing is simple and does not cause unwanted problems, such as jamming in the HotEnd or getting entangled in the pinion of the extruder.

Everything discussed above, make the Smartfil TPU 93A a material commonly used in all industrial sectors to achieve resistant parts, with impact absorption power and good surface quality.

When defining what material is needed for an application with a material with some flexibility, it will be necessary to analyze the sum of two totally differentiated vectors from which the correct choice or resulting vector will result. On the one hand, the hardness of the material itself (normally compared on a Shore A scale) and, on the other hand, the type of material (TPE or TPU), with the differences regarding its intrinsic properties.

In the following table you can see the comparison between the different materials with some flexibility that exist in the market:

	TPE 70A Filaflex	TPE 82A Filaflex	TPE 90A Flexfill	TPU 92A Flexfill	TPU 93A Smartfil	TPE 96A Flexfill	TPU 98A Flexfill
Tensile strength (MPa)	32	45	5	49	40	5	53.7
Elongation at break	900 %	600 %	250 %	-	-	150 %	318 %
Absorción humedad					-
Chemical resistance	Solvent Acetone Fuel	Solvent Acetone Fuel	Water Acid Alcohol Alkali	Polish Oil	Polish Oil Solvent	Water Acid Alcohol Alkali	Polish Oil
Contact food and skin	Not recommend.	Not recommend.	Certificate	Not recommend.	Not recommend.	Reliable	Not recommend.
Permeability gases					-

Table 1: Comparison of properties of the flexible filament range.

General information
Material	TPU/TPE
Format	50 g / 750 g
Density	(ISO 1183) 1.21 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	± 0.05 mm
Filament length	(Ø 1.75 mm - 0.750 Kg) ± 257 m / (Ø 2.85 mm - 0.750 Kg) ± 97 m

Printing properties
Printing temperature	215 - 235 ºC
Print bed temperature	0 - 60 ºC
Chamber temperature	✗
Cooling fan	✓
Recommended printing speed	20 - 30 mm/s

Mechanical properties
Elongation at break	301 %
Tensile strength	(ISO 37) 40 MPa
Tensile modulus	2.7 MPa
Flexural strength	33.6 MPa
Flexural modulus	50.4 MPa
Surface hardness	(ISO 868) Shore 93A
Impact strength	18.75 KJ/m²

Thermal properties
Softening temperature	56 ºC

Specific properties
Transparency	-
Chemical resistance	✓

Other
HS Code	3916.9
Spool diameter (outer)	200 mm
Spool diameter (inner hole)	55 mm
Spool width	50 mm

It is recommended to use some adhesive for the printing base (Magigoo, DimaFix or 3DLac) so that the first layer of Smartfil TPU 93A filament adheres correctly. Although it is not necessary to use a hot base, a temperature between 30 and 60 ºC, a printing temperature of 215 - 235 ºC and the 100% layer fan is recommended. In the event that printing problems appear due to sliding of the filament in the head, it is advised not to use shrinkage and increase the flow in the event that the extrusion is intermittent. When making small pieces, it is also advisable to always print without retraction.