LayWoo-D3 pellets - Kai Parthy
search
Compare
You must be logged in to manage your wishlist.

LayWoo-D3 pellets - Kai Parthy

KAI-PELLETS-LAYWOOD3-BROWN-1KG
22.00 € 22.00 €
Tax excl.
Format
Colour
Quantity

In stock 3 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Wednesday 20 November
Available

These LayWoo-D3 pellets by Kai Parthy are an FGF 3D printing material to be used for direct extrusion or filament production. The Kai Parthy LayWoo-D3 pellets have a brown color and are made from the same material as the LayWoo-D3 filament - wood fibers and a binding polymer.

Parts 3D printed with the LayWoo-D3 pellets mimic the surface finish and texture of real wood and can be processed as such - by sanding or painting. It is also possible to slightly darken or lighten the color of the part by, respectively, increasing or decreasing the extrusion temperature (180-250 ºC). Thanks to these features the LayWoo-D3 pellets are perfect for decorative applications.

Parts 3D printed with the LayWoo-D3 material

Image 1: Parts 3D printed with the LayWoo-D3 material. Source: Kai Parthy.

The LayWoo-D3 pellets have a size of 2-3 mm and are best processed on the Mahor V4 pellet extruder or the Tumaker 3D printers for direct extrusion onto a printing surface. It is also possible to make filament from the LayWoo-D3 pellets with the help of the Felfil EVO extruder or Filastruder.

General information
Manufacturer Lay Filaments
Material PLA
Format 1 kg
Density 1.22 g/cm³

Mechanical properties
Elongation at break 6.5 %
Tensile strength 18 MPa
Tensile modulus - MPa
Flexural strength - MPa
Flexural modulus - MPa
Surface hardness -

Thermal properties
Melting temperature - ºC
Softening temperature - ºC
Processing temperature 250 ºC
MFR Ratio -
Glass transition temperature - ºC
Heat deflexion temperature 71 ºC

Other
HS Code 3901.1

It is very important to store LayWoo-D3 pellets properly in an airtight bag to prevent them from absorbing moisture from the environment before use. If the pellets have moisture in them, the resulting parts or filament may contain small imperfections.

The wood fibers in the LayWoo-D3 pellets may increase the risk of nozzle clogging, which is why the manufacturer recommends using a nozzle of at least 0.35 mm (best 0.5 mm) and a direct drive printer to avoid clogging and deformation. The recommended extrusion temperatures are between 180-250 ºC but going below 200 ºC involves the risk of jamming the extruder. It is recommended to use a printer with a heated bed (40ºC) with some Kapton Tape or 3DLac to avoid warping. Once the printing is done, some cleaning pellets should be used to remove any remaining LayWoo-D3 from the extruder.

Related products