Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

PETG Medical - Lattice Services

Ref.: LATTICE-PETGMED-TRANSL-175-500

45.75 €

Tax excl.

Diameter

Format

Colour

Quantity

Do you need more than 1 units?
Please, contact us.

In stock 1 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 15 November

Available

Returns

Ask about this product

The PETG Medical filament by Lattice Services is a made from a high quality polyethylene glycol (PETG) base. PETG is an amorphous and rigid thermoplastic that does not crystalize when heated. This gives PETG a wide range of valuable features such as excellent mechanical, thermal and chemical resistance, low deformation, great printability and translucency, making PETG a great alternative to PLA, ABS or PA.

A part 3D printed with the PETG Medical filament

Image 1: A part 3D printed with the PETG Medical filament. Source: Lattice Services.

Furthermore, the PETG Medical filament is compliant with the ISO 10993-5 certification for skin contant. In combination with the translucency and chemical resistance, it makes the PETG Medical filament perfect for applications such as prototypes of medical device packaging or prototypes of MD in contact with fluids (respirators, breathing duct, suction, etc).

It must be noted that parts 3D printed with the PETG Medical filament can under no circumstance be implanted in humans. The manufacturer does not assume any responsibility for the medical use of the product and each use case must be assessed for its viability for any medical use by the user of the PETG Medical filament.

General information
Material	PETG
Format	0.5 kg
Density	1.28 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	- mm
Filament length	(Ø1.75 mm, 0.5 kg) ±162.4 m / (Ø2.85 mm, 0.5 kg) ±61.2 m

Printing properties
Printing temperature	230 - 245 ºC
Print bed temperature	75 - 85 ºC
Chamber temperature	-
Cooling fan	10 - 50 %
Recommended printing speed	40 - 70 mm/s

Mechanical properties
Elongation at break	7 %
Tensile strength	35 MPa
Tensile modulus	1500 MPa
Flexural strength	55 MPa
Flexural modulus	1500 MPa
Surface hardness	-
Impact strength	3 KJ/m²

Thermal properties
Softening temperature	78 ºC

Specific properties
Transparency	✓
Chemical resistance	✓

Other
HS Code	3916.9
Spool diameter (outer)	- mm
Spool diameter (inner hole)	- mm
Spool width	- mm

Once opened, the PETG Medical filament should be stored properly to prevent it from absorbing moisture from the air. The best way to store filaments in a tightly sealed bag with desiccant, in a vacuum sealed container or in an intelligent filament container. During printing, the filament can be placed in PolyBox or the FilaDryer S2 filament dryer.

The manufacturer recommends printing PETG Medical filament at 230-245 ºC on a bed heated to 75-85 ºC. It is recommended to print at a speed of 40-70 mm/s with the layer fan on (10-50 %).

It is highly recommended to wear standard safety equipment during the printing and post-processing of parts 3D printed with the PETG Medical filament - safety goggles, gloves, breathing equipment and protective garments, according to needs.