Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Fiberlogy Refill Easy PETG

Ref.: FIBERL-REF-PETG-BLACK-175-850

16.45 €

Tax excl.

Diameter

Format

Colour

Quantity

In stock 5 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 22 November

Available

Returns

Ask about this product

Refill Easy PETG is a material developed by the renowned filament manufacturer Fiberlogy, which offers filaments with exceptional quality, perfect for a multitude of applications in various industries.

Refill Easy PETG is a thermoplastic copolyester (extruded polyethylene terephthalate glycol copolyester). Unlike PET filaments, it does not crystallise when heated, so it is very tough and flexible, in addition to its well-known chemical resistance (it is resistant to water, acids, alkalis and alcohols).

Refill Easy PETG filament is a modified version of the simpler PET; it is a non-toxic thermoplastic polymer used in the manufacture of clothing and products such as containers.

PETG Refill Rolls.

Image 1: PETG Refill rolls. Source: Fiberlogy.

Refill Easy PETG is a high quality PETG filament. PETG filaments are gaining a lot of popularity due to its low melting temperature and durability, making it a good alternative to any ABS or Nylon. This filament is very useful for the production of final parts or functional prototypes.

Refill Easy PETG exhibits many properties similar to those of a PLA filament. On a mechanical level, PETG has better properties. In terms of thermal resistance, PETG achieves a lower value than ABS, but higher than the vast majority of PLA.

Properties of Refill PETG

Image 2: Properties of Refill Easy PETG. Source: Fiberlogy.

Refill Easy PETG has a high adhesion to the base and adhesion between layers, so warping effect is practically nil.

Among the different Refill Easy PETG colours available are some translucent colours, which can be used to produce translucent parts, especially when printing parts with low wall thicknesses.

Refill Easy PETG is presented on a filament reel without a spool, i.e. its format is masterspool. This format requires the use of a spool holder. It is possible to download models of detachable spools ready for 3D printing, but sometimes these detachable spools do not adapt well to the dimensions of the masterspool. In these cases, it is very useful to use a variable sized spool holder that automatically adjusts to the inside diameter of the masterspool. For instructions on how to use the variable sized spool holder, please refer to the section "Tips for use".

Variable spool holder

Image 3: Variable spool holder. Source: Filament2print.

Fiberlogy is one of the manufacturers to include this format in its range of materials. Its quality and applications are identical to those of the Easy PETG filament with a spool. The only difference is that the refill does not have a spool, thus saving resources and reducing the environmental impact.

General information
Material	PETG
Format	850 g
Density	(ASTM D792) 1.29 g/cm³
Filament diameter	1.75 mm
Filament tolerance	± 0.02 mm
Filament length	± 274

Mechanical properties
Elongation at break	(ISO 527-2) 4 %
Tensile strength	(ISO 527-2) 51 MPa
Tensile modulus	(ISO 527-2) 2980 MPa
Flexural strength	(ISO 172) 68 MPa
Flexural modulus	(ISO 172) 2040 MPa
Surface hardness	(ASTM D2240) Shore 76D
Impact strength	5 KJ/m²

Printing properties
Printing temperature	230 - 250 ºC
Print bed temperature	90 ºC
Chamber temperature	-
Cooling fan	✓
Recommended printing speed	100 mm/s

Thermal properties
Softening temperature	(ISO 306) 78 ºC

Specific properties
Transparency	-
Chemical resistance	✓

Other
HS Code	3916.9
Spool diameter (outer)	- mm
Spool diameter (inner hole)	- mm
Spool width	- mm

When using the variable spool holder, the following guidelines should be observed:

The variable spool holder works very simply. Simply compress the product directly with your hands, insert it inside the masterspool and release it so that it returns to its original shape.
Then take one end of the filament and place it in the clamping slot. In this way, the start of the masterspool will be fixed. These slots are also used to hold the end of the filament each time a print is completed, thus avoiding possible overlapping of the filament.

To ensure optimal print quality, it is necessary to select the appropriate settings for each 3D printer, considering the printing conditions. The recommended printing temperature ranges between 220 and 250 ºC, and the best bed temperature is 90 ºC (Kapton tape on glass). The layer fan should be set between 0 and 25%, and the flow rate between 95 and 105%. The recommended print speed is < 100 mm/s. The ideal retraction speed is between 20 and 45 mm/s, with 2 to 3 mm retraction for direct extrusion and 3 to 5 mm retraction for Bowden.

Proper storage of Easy PETG filament is essential, as processing damp filament can lead to polymer chain degradation, fragility, poor layer adhesion, stringing, and oozing. It's best to store the filament in a sealed bag with desiccant or in a vacuum-sealed filament container. If the filament absorbs excess moisture, it should be dried in a filament dryer at 60 ºC for 4 hours before it can be extruded.