Display Nav Left

Language:

-20%

Compare

You must be logged in to manage your wishlist.

Liqcreate Elastomer-X resin

Ref.: LIQC-ELASTOMERX-250

44.95 €

-20%

35.96 €

Tax excl.

Format

Volume discounts

Quantity	Discount	Price
10	10% 10%	40.46 € 40.46 €
15	12% 12%	39.56 € 39.56 €

Quantity

In stock 2 units available for immediate shipping.
units available for shipping in 3 - 4 days Available for shipment within 3 - 4 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Monday 1 December

Returns

Ask about this product

Elastic 3D printing resins have multiple applications in many sectors, and are especially useful in applications such as the production of digital lattice foams, soft end of arm tooling (EOAT) for robots, grommets, bellows and elastic industrial parts. The rubber-like Elastomer-X resin by Liqcreate was designed especially for those purposes. It is a clear photopolymer resin printable on most resin based 3D-printers (DLP, LCD, SLA) in the range of 385-420 nm by brands such as Anycubic or Phrozen. A full list of compatible 3D printers can be consulted here.

Video 1: 3D printing with the Elastomer-X resin. Source: Liqcreate.

Parts 3D-printed with the Elastomer-X resin are exceptionally soft (Shore 43A) and have great flexibility and elasticity, mimicing parts 3D printed with soft TPU or silicone. Another advatage offered by the Elastomer-X resin is that it can be colored with almost any commercially available resin colorant, for example the UVO colorants by Smooth-On.

Elastic fingers 3D printed for a robotic arm with the Elastomer-X resin

Image 1: Elastic fingers 3D printed for a robotic arm with the Elastomer-X resin. Source: Liqcreate.

Adding colorant to the Elastomer-X resin should not in any way influence the mechanical properties of the 3D printed part but it can influence the printing time. The results can also depend on the colorant and 3D printer used, which is why the user should conduct own experiments to elaborate the most convenient coloring procedure.

General information
Manufacturer	Liqcreate
Material	Photopolymer
Format	0.25 kg / 1 kg
Technology	SLA / LED-LCD / DLP
Wavelength	385 - 405 nm
Viscosity	@ 25 ºC: 2000 cP
Density (liquid)	1.18 g/cm²

Printing properties
Layer height	25 - 100 µm
Layer exposure time	-
Layer off time	-
Lifting height	- mm
Bottom layer exposure	-
Bottom layer count	-

Mechanical properties
Izod impact strength	- KJ/m²
Charpy impact strength	- KJ/m²
Elongation at break	(ASTM D638M) 140 -180 %
Tensile strength	(ASTM D638M) 1.5 MPa
Tensile modulus	- MPa
Flexural strength	- MPa
Flexural modulus	- MPa
Surface hardness	(ASTM D2240) Shore 43 A

Thermal properties
Softening temperature	- ºC

Specific properties
Maximum water absorption	(UD570-98) 1.5 %

Curing, washing, and sintering properties
Washing time	4 - 5 min
Curing time	-
Curing temperature	- ºC

Other
HS Code	2916.1
Lifetime (since manufacturing)	- M

On the Liqcreate website the user can find a guide on how to process flexible 3D printing resins.

In order to ensure resin longevity and successful 3D prints, it is advised to store the Elastomer-X resin in a clean and dry environment, out of direct sunlight and in a temperature of 5-30 ºC. Before use, the resin bottle should be shaken energetically for at least 1 minute (at least 3 minutes in the case of filled resins) and then left to rest for around 10 minutes to let the air bubble escape. Leftover resin can be poured back into the bottle but it should be first filtered to ensure there is no polymer residue present. Safety equipment such as protective garments, gloves and face protection is highly recommended for the handling of resin.

As far as the post-processing of the Elastomer-X, a few simple steps must be followed. First, the 3D printed part has to be cleaned for a maximum of 6 minutes in Liqcreate Resin Cleaner, IPA alcohol or bioethanol, preferably ultrasonic or under agitation. Then the completely dried part has to be cured in a high-power UV curing chamber. The curing workflow is explained in detail by the manufacturer here. It absolutely crucial that the parts are dry before they are cured. The curing of wet or sticky parts will lead to mechanical and surface defects. The drying can be done by simply leaving the cleaned part in a well ventilated area for at least 30 minutes or with the help of pressurized air (2 minutes) for parts cleaned in IPA alcohol or ethanol.

Featured properties

Technology

SLA / LED-LCD / DLP

PROPERTY SEARCH

NOT SURE WHICH 3D PRINTER IS RIGHT FOR YOU?

CAN'T FIND A PRODUCT?

CAN'T FIND A PRODUCT?

PROPERTY SEARCH

CAN'T FIND A PRODUCT?

PROPERTY SEARCH

CAN'T FIND A PRODUCT?

PROPERTY SEARCH

CAN'T FIND A PRODUCT?

PROPERTY SEARCH

CAN'T FIND A PRODUCT?

PROPERTY SEARCH

CAN'T FIND A PRODUCT?

PROPERTY SEARCH

CAN'T FIND A PRODUCT?

Liqcreate Elastomer-X resin

Description

General information

Printing properties

Mechanical properties

Thermal properties

Specific properties

Curing, washing, and sintering properties

Other

Quick Guide Liqcreate resins

Elastomer-X Datasheet

Liqcreate product catalog

Elastomer-X Safety Datasheet GB

Featured properties

Related products