We will remain closed until January 1st due to the Christmas holidays. Orders received until Thursday, December 26th will be shipped on Friday, December 27th. Orders received from Friday, December 27th will be shipped on January 2nd. Happy Holidays!

Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Dental Model Resin - FormLabs

Ref.: RS-F2-DMBE-02

135.00 €

Tax excl.

Format

Compatibility

Quantity

In stock 4 units available for immediate shipping.
units available for shipping in 5 - 8 days Available for shipment within 5 - 8 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 27 December

Available

Returns

Ask about this product

FormLabs Dental Resins are specialized materials for the dental field, where the use of this type of technology is increasingly present. The dental resins allow models of crowns and bridges, surgical guides, splints and retainers to be made with incredible accuracy, with a maximum deviation of ±100 microns, and with very low material costs per element (1.4 - 3.3 ?), which amortizes the use of the printer with any of the dental resins in a few months.

Dental Model Resin is a high performance material for crowns and dental bridge models.

Form 2 Dental Model Resin application

Image 2: Dental Model Resin application. Source: FormLabs

With the print configuration of 25 microns (layer height) clear margins are achieved, and, precise and consistent contacts with an accuracy of ± 35 microns in 80% of the model. In the rest of the model an accuracy of ± 100 microns is achieved in more than 90% of the surfaces. These values of such low tolerances make it possible to insert the extractable matrices (teeth) with a fitted adjustment.

Form 2 Dental Model Resin precision

Image 3: Dental Model Resin precision. Source: FormLabs

In addition, the Model Dental Resin has a smooth finish and a color similar to plaster, which facilitates the clear visualization of the model during production. Thanks to all the above and the low cost (€ 4.7 for each matrix), this type of models compete directly with those enhanced in clay.

Much of the dental industry is already using 3D printing, through Form 2, Form 3 or Form 3B and Dental Resins, to enhance their services more accurately, quickly and economically.

General information
Manufacturer	FormLabs
Material	Photopolymer
Format	1 L / 5 L
Technology	SLA / LFS
Wavelength	UV 405 nm
Compatible resin tanks	Form 2 LT / Form 3/3B V2.1, Form 3L/3BL V1/V2/V3
Compatible 3D printers	Form 2 / Form 3/3+/3B/3b+/3L/3BL

Printing properties
Layer height	0.1 - 0.05 - 0.025 µm
Layer exposure time	-
Layer off time	-
Bottom layer exposure	-
Bottom layer count	-

Curing and washing properties
Washing time	(FormWash) 10 min
Curing time	(FormCure) 60 min
Curing temperature	60 ºC

Mechanical properties (uncured / cured)
Izod impact strength	- KJ/m²
Charpy impact strength	- KJ/m²
Elongation at break	(ASTM D638) 25 % / 5 %
Tensile strength	(ASTM D638) 33 MPa / 61 MPa
Tensile modulus	(ASTM D638) 1600 MPa / 2700 MPa
Flexural strength	(ASTM D790) 33.9 MPa / 95.8 MPa
Flexural modulus	(ASTM C790) 950 MPa / 2500 MPa
Surface hardness	-

Thermal properties (uncured / cured)
Softening temperature	(ASTM D648 @ 66 psi) 47.5 ºC / 67 ºC

Other
HS Code	2916.1
Lifetime (since manufacturing)	18 M

Below, a series of usage tips are cited that must be taken into account at all times with the use of FormLabs resins:

Change cartridge

Changing the resin cartridge of the FormLabs printers is very simple, just close the top cap of the ventilation duct (vent) and remove the cartridge by holding it by the handle it has. Then the other is inserted and the vent plug is opened in case an impression is to be started. To avoid drips through the 3D printer, this process must always be carried out with the resin tank mounted.

Vent plug FormLabs

Image 1: Vent plug of the FormLabs cartridges. Source: FormLabs

After finishing each impression the vent plug must be closed so that the resin maintains its properties. In addition, if you don't use the printer for some time, you should keep the cartridge in its original box to keep the properties of the resin intact.

Resin tank

Each type of resin must have its resin tank, which must be changed after using 2L of resin. FormLabs has developed a more powerful tank, the Resin Tank LT, which has a life up to 20 times longer than the standard tank.

FormLabs Resin Tank LT

Image 2: FormLabs Resin Tank LT. Source: FormLabs

To protect and store the excess resin in the tank after each printing, FormLabs supplies a lid that ensures a perfect closure. Once the tank is closed, it is recommended to store it (with resin and lid) in the original box so that the resin doesn't lose its properties when exposed to UV rays for a long time. Another point to keep in mind is that the tanks can't be cleaned with any cleaning product or similar (for example, isopopyl alcohol), since they lose certain qualities that can cause continuous failed impressions.

FormLabs Resin Tank

Image 3: FormLabs Resin Tank. Source: FormLabs

Failed printing

When an error occurs in printing may be because solid parts of a previous printing have fallen to the resin tank. In this case, a spatula at 45° must be passed through the printing tank, gathering all the solid parts in a corner and removing them. To ensure that the tank resin doesn't contain any solid parts, the resin should be cast with a 190 μm paper filter. Once cast, it is put back into the tank and it is ready to be used again.

Video 1: Clean resin tank. Source: FormLabs

Isopropyl alcohol

Isopropyl alcohol is the key to the washing and post-processing of parts and you should know when it is time to change it. In the Finish Kit the moment to change it's when the IPA (Isopropyl Alcohol) is so saturated with resin particles, that after washing the pieces are still sticky. At that point you must remove all the liquid, clean the container well and throw new IPA, but never fill in on the previous one.

Finish Kit FormLabs

Image 4: Finish Kit FormLabs. Source: FormLabs

In the Form Wash, the wash center itself indicates through its screen when it is time to change the isopropyl alcohol.

Video 2: FormLabs Ecosystem. Source: FormLabs

If you wish you can contract our SLA 3D printing training courses (online or in person) by contacting us through the contact form. The training is oriented to obtain a wide knowledge and know how to use the 3D SLA FormLabs printers from the beginning and t.hus avoid major errors.