Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Resin Dental Denture Base Soft - Harz Labs

Ref.: DENT-HL-DDB-SOFT-1000

135.50 €

Tax excl.

Format

Colour

Volume discounts

Quantity	Discount	Price
5	10% 10%	121.95 € 121.95 €
10	15% 15%	115.18 € 115.18 €
15	20% 20%	108.40 € 108.40 €

Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 7 - 10 days Available for shipment within 7 - 10 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Thursday 13 March - Tuesday 18 March

Available

Returns

Ask about this product

General information
Manufacturer	Harz Labs
Material	Photopolymer
Format	Bottle
Density	(ASTM D1298) 1.1 ± 0.1 g/cm³
Technology	SLA / LED-LCD / DLP
Viscosity	(ASTM D2393 @ 25ºC) 1700± 400 mPas
Viscosity	(ASTM D2393 @ 25ºC) 1700± 400 mPas
Viscosity	(ASTM D2393 @ 25ºC) 1700± 400 mPas

Mechanical properties (uncured / cured)
Charpy impact strength	(ASTM D6110) 7 ± 2 KJ/m²
Elongation at break	(ASTM D638) 65.0 ± 15.5 %
Elongation at break	(ASTM D638) 65.0 ± 15.5 %
Tensile strength	(ASTM D638) 21.0 ± 5.0 MPa
Tensile strength	(ASTM D638) 21.0 ± 5.0 MPa
Tensile strength	(ASTM D638) 21.0 ± 5.0 MPa
Tensile modulus	(ASTM D638) 250±25 MPa
Tensile modulus	(ASTM D638) 250±25 MPa
Tensile modulus	(ASTM D638) 250±25 MPa
Surface hardness	(ASTM D2240 Shore D) 89 ± 3
Surface hardness	(ASTM D2240 Shore D) 89 ± 3
Surface hardness	(ASTM D2240 Shore D) 89 ± 3

Other
HS Code	2916.1
HS Code	2916.1

How to Print with Dental Resin and Avoid Shrinkage

Modern LCD and DLP printers allow for precise and fast printing, but to get good results, it is necessary to properly adjust the print settings, whether it's the exposure time or the light off delay. To facilitate the shrinkage compensation process in 3D printing with dental resin, Harz Labs has created its own printing test, which can be downloaded from this link.

Harz Labs printing test view.

Photo 1: Overview of the Harz Labs printing test. Source: Harz Labs.

How to Wash and Cure Harz Labs Dental Resin

Wash the product for 6 minutes. First, rinse the main resin layer in "dirty alcohol," then complete the wash stage in "clean alcohol." Use IPA (absolute) or ethyl alcohol (at least 96%). Optionally, a soft brush and an ultrasonic cleaner can be used.

The curing time and temperature will depend on the curing station used. Harz Labs provides users with a table of the corresponding values, which can be consulted at this link.

The Safety Data Sheet and the Technical Data Sheet for the product are available in the Attachments tab.