Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Biomed Clear Resin - FormLabs

Ref.: RS-F2-BMCL-01

349.00 €

Tax excl.

Format

Compatibility

Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 5 - 8 days Available for shipment within 5 - 8 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 29 November - Wednesday 4 December

Available

Returns

Ask about this product

Formlabs' BioMed Resins were developed for customers seeking medical-grade biocompatible materials for a wide range of applications, from prototypes to end-use devices. Customers can use these materials with confidence for applications that require contact of the patient's skin and mucous membrane. In addition to meeting the requirements of the ISO standard for biocompatibility, BioMed resins also comply with ISO 13485.

Both BioMed Clear resin and BioMed Amber resin produce strong, functional parts that are biocompatible and compatible with most common sterilization techniques. BioMed Clear Resin is USP Class VI certified and is suitable for the manufacture of durable parts and parts requiring low water absorption. BioMed Amber Resin is suitable for the manufacture of rigid parts that may require higher definition.

The following table shows the comparison between these two resins:

Material	Biomed Clear	Biomed Amber
Tensile strength	52.9 ± 1.3 MPa	73 MPa
Tensile modulus	2.08 ± 0.13 GPa	2.9 GPa
Elongation	12.2 % ± 4.2 %	12.3 %
Bending strength	84.4 ± 1.0 MPa	103 MPa
Bending modulus	2.29 ± 0.02 GPa	2.50 GPa
Shore D hardness		67 D

BioMed Clear is a hard and durable material designed for use in biocompatible applications that require continuous contact with the skin or mucous membranes. This Class VI material is suitable for applications requiring wear resistance and low water absorption over time. Parts printed with BioMed Clear Resin are compatible with common disinfection and sterilization methods.

BioMed Clear Resin is ISO 13485 certified and is included in an American Food and Drug Administration (FDA) Device Master File.

Biomed Clear

Image 1: Parts printed with Biomed Clear by FormLabs. Source: FormLabs.

BioMed Clear is the improved version of the Dental LT Clear. Compared to the Dental LT Clear resin, it has the following advantages:

0.3 mm bracket contact points on Form 3B, reducing post-processing of parts.
Faster impressions
Improved resistance to yellowing: 60% less yellow
Color and clarity similar to PMMA
Impact resistance 50% higher.

Due to its characteristics, this resin has different applications, both in the dental sector and in other areas:

Dental applications:

Occlusal splints
Occlusal protectors
Wear prevention

Medical and other applications:

Medical device manufacturing
Templates and accessories
Surgical planning tools and implant sizing.
Bioprocessing equipment
Research & Development
Consumer goods, arts and entertainment

Thus, BioMed Clear resin is a medical grade biocompatible material designed for use in a wide variety of applications in the healthcare industry.

To ensure the biocompatibility of BioMed Clear resin, the use of dedicated tanks, construction platform and finishing kits are required and should only be used with this and other biocompatible Formlabs resins.

General information
Manufacturer	FormLabs
Material	Photopolymer
Format	1 L / 5 L
Technology	SLA / LFS
Wavelength	UV 405 nm
Compatible resin tanks	Form 2 LT / Form 3/3B V1/V2/V2.1, Form 3L/3BL V1/V2, Form 4
Compatible 3D printers	Form 2 / Form 3B/3B+/3BL, Form 4

Printing properties
Layer height	100 µm
Layer exposure time	-
Layer off time	-
Bottom layer exposure	-
Bottom layer count	-

Curing and washing properties
Washing time	15 + 5 min
Curing time	30 min
Curing temperature	Form 2: 60 / Form 3: 70 ºC

Mechanical properties (uncured / cured)
Izod impact strength	- KJ/m²
Charpy impact strength	- KJ/m²
Elongation at break	(ASTM D638) 12 %
Tensile strength	(ASTM D638) 52 MPa
Tensile modulus	(ASTM D638) 2080 MPa
Flexural strength	(ASTM D790) 84 MPa
Flexural modulus	(ASTM C790) 2300 MPa
Surface hardness	(ASTM 2240) Shore 78 D

Thermal properties (uncured / cured)
Softening temperature	- ºC

Other
HS Code	2916.1
Lifetime (since manufacturing)	24 M

Here below, a series of usage tips that must be taken into account at all times with the use of FormLabs resins are cited:

Change cartridge

Changing the resin cartridge of the FormLabs printers is very simple, just close the top cap of the ventilation duct (vent) and remove the cartridge by holding it by the handle it has. Then the other is inserted and the vent plug is opened in case an impression is to be started. To avoid drips through the 3D printer, this process must always be carried out with the resin tank mounted.

Tapón de ventilación FormLabs

Image 1: Ventilation cap for FormLabs cartridges. Source: FormLabs

After finishing each print, the top cap must be closed so that the resin maintains its properties. In addition, if the printer is not used for some time, the cartridge should be stored in its original box to keep the properties of the resin intact.

Resin tank

Each type of resin should have its own resin tank, which should be changed after using 2L of resin. The Biomed Clear resin is compatible with the LT resin tank and the Form 3 resin tank.

Tanque de Resina LT de FormLabs

Image 2: FormLabs Resin Tank LT. Source: FormLabs

To protect and store the excess resin in the tank after each printing, FormLabs supplies a lid that ensures a perfect closure. Once the tank is closed, it is recommended to store it (with resin and lid) in the original box so that the resin doesn't lose its properties when exposed to UV rays for a long time. Another point to keep in mind is that the tanks can't be cleaned with any cleaning product or similar (for example, isopopyl alcohol), since they lose certain qualities that can cause continuous failed impressions.

Failed printing

When an error occurs in printing may be because solid parts of a previous printing have fallen to the resin tank. In this case, a spatula at 45° must be passed through the printing tank, gathering all the solid parts in a corner and removing them. To ensure that the tank resin doesn't contain any solid parts, the resin should be cast with a 190 μm paper filter. Once cast, it is put back into the tank and it is ready to be used again.

Video 1: Clean resin tank. Source: FormLabs

Isopropyl alcohol

Isopropyl alcohol is the key to the washing and post-processing of parts and you should know when it is time to change it. In the Finish Kit the moment to change it's when the IPA (Isopropyl Alcohol) is so saturated with resin particles, that after washing the pieces are still sticky. At that point you must remove all the liquid, clean the container well and throw new IPA, but never fill in on the previous one.

Finish Kit FormLabs

Image 3: Finish Kit FormLabs. Source: FormLabs

In the Form Wash, the wash center itself indicates through its screen when it is time to change the isopropyl alcohol.

Video 2: FormLabs Ecosystem. Source: FormLabs

If you wish you can hire our SLA 3D printing training courses (online or in person) by contacting us through the contact form. The training is oriented to obtain a wide knowledge and know how to use the 3D SLA FormLabs printers from the beginning and thus avoid major errors.