Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Tarfuse ENVI filament

Ref.: TARFUSE-ENVI-NATURAL-175-1000

17.35 €

Tax excl.

Diameter

Format

Colour

Quantity

In stock 8 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 15 November

Available

Returns

Ask about this product

Tarfuse ENVI 1 is an environmentally friendly 3D printing material developed and manufactured by Grupa Azoty. The base for ENVI 1 are renewable raw materials and the filament is fully biodegradable. This means that it is capable of decomposing in the environment in the presence of micro-organisms, leaving behind only natural and harmless substances such as water, CO2 and organic matter. These features make the Tarfuse ENVI 1 filament superior to pure PLA in terms of biodegradation speed and conditions, as well as the amount of CO2 released into the atmosphere.

A part 3D printed with the Tarfuse ENVI filament

Image 1: A part 3D printed with the Tarfuse ENVI filament. Source: Grupa Azoty.

As a 3D printing material, Tarfuse ENVI 1 is highly printable and offers excellent surface quality and detail, with outstanding interlayer adhesion and low linear shrinkage. The best applications fot this material are all kinds of prototypes, preview models, or advertising details.

General information
Material	PLA
Format	1 kg
Density	1.3 g/cm³
Filament diameter	1.75 mm
Filament tolerance	± 0.05 mm
Filament length	±319.8 m

Printing properties
Printing temperature	195 - 230 ºC
Print bed temperature	50 - 70 ºC
Chamber temperature	✗
Cooling fan	-
Recommended printing speed	30 - 60 mm/s

Mechanical properties
Elongation at break	(ISO 527-1,-2) XY: 1.8 / XZ: 1.5 %
Tensile strength	(ISO 527-1,-2) XY: 33 / XZ: 40 MPa
Tensile modulus	(ISO 527-1,-2) XY: 2840 / XZ: 2900 MPa
Flexural strength	(ISO 178) XY: 28 / XZ: 32 MPa
Flexural modulus	- MPa
Surface hardness	-

Thermal properties
Melting temperature	(ISO 11357-1-3) 150 - 160 ºC
Softening temperature	- ºC

Other
HS Code	3916.9
Spool diameter (outer)	- mm
Spool diameter (inner hole)	- mm
Spool width	- mm

The spool should be stored properly to avoid potential printing and part quality issues. It is recommended to store the spool in a tightly sealed plastic bag with a desiccant or in an intelligent filament container.

This material should be printed at a temperature of 195-230 ºC on a bed heated to 50-70 ºC. A heated chamber is not required and the optimal printing speed is 30-60 mm/s. The recommended bed material is glass or a PC/PA surface with a PVA-type glue.