We will remain closed until January 1st due to the Christmas holidays. Orders received until Thursday, December 26th will be shipped on Friday, December 27th. Orders received from Friday, December 27th will be shipped on January 2nd. Happy Holidays!

Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

3DXSTAT ESD PA12

Ref.: 3DXTECH-ESD-PA12-175-750

145.00 €

Tax excl.

Diameter

Format

Colour

Quantity

In stock 8 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Thursday 26 December

Available

Returns

Ask about this product

3DxTech's filament portfolio includes a wide range of ESD-safe technical filaments. One of them is the 3DXSTAT ESD PA12 filament, which is made of a special nylon 12 and a state-of-the-art carbon nanotube matrix. This formulation guarantees excellent mechanical properties (low shrinkage, high dimensional stability, reproducible part-to-part dimensions) as well as excellent printability. The carbon nanotube technology used in 3DXSTAT ESD PA12 filament gives it a low density, which makes it perfect for 3D printing of lightweight parts.

3DXSTAT ESD PA12 filament features low moisture absorption, exceptional chemical and solvent resistance (higher compared to PA6 and PA66), UV resistance and high thermal resistance, allowing 3DXSTAT ESD PA12 filament to be used for 3D printing of fixtures, tools and brackets for demanding and harsh industrial environments with operating temperatures up to 150°C and humidity.

Other ideal applications are ESD-proof semiconductor parts for the automotive, oil & gas and electrical/electronic industries. This is made possible by the dissipative properties of the 3DXSTAT ESD PA12 filament, which allows electrostatic charge to dissipate safely along its surface and away from equipment that could be damaged by the discharge.

General information
Material	PA
Format	750 g
Density	1.14 g/cm³
Filament diameter	1.75 mm
Filament tolerance	±0.05 mm
Filament length	(Ø 1.75 mm-0.75 Kg) ±273.5 m / (Ø 2.85 mm-0.75 Kg) ±103.1 m

Electrical properties
Surface electrical resistivity	(ASTM D257) > 10³ - 10⁷ < Ohm/sq

Printing properties
Printing temperature	275 - 295 ºC
Print bed temperature	90 - 110 ºC
Chamber temperature	✓
Cooling fan	-
Recommended printing speed	- mm/s

Mechanical properties
Elongation at break	(ISO 527) 3.8 %
Tensile strength	(ISO 527) 68 MPa
Tensile modulus	(ISO 527) 6900 MPa
Flexural strength	(ISO 178) 81 MPa
Flexural modulus	(ISO 178) 6700 MPa
Surface hardness	-

Thermal properties
Softening temperature	- ºC

Specific properties
Transparency	✗
Chemical resistance	✓

Other
HS Code	3916.9
Spool diameter (outer)	200 mm
Spool diameter (inner hole)	52 mm
Spool width	55 mm

The 3DXSTAT ESD PA12 filament should be printed at a temperature of 275-295 ºC, on a bed heated to 90-110 ºC. It is also recommended to use a 3D printed with a heated chamber (up to 145°C) if possible as it can help prevent warping. Another way to prevent warping and improve adhesion of the 3D printed part to the printing surface (especially with large parts) is to use the Magigoo adhesive.

Since the 3DXSTAT ESD PA12 filament contains abrasive carbon fibers, the manufacturer recommends printing it with a hardened steel nozzle with a diameter of at least 0.4 mm. Using a nozzle that is not wear resistant will lead to its excessive wear and a deterioration in print quality. The ideal layer height is 60% of nozzle diameter and it is not advised to print layers smaller than 0.2mm with carbon fiber reinforced filaments.

Complex parts can be created with the 3DXSTAT ESD PA12 filament with the help of support structures. The compatible support filament is the AquaTek X1 UMS filament by 3DxTech.

The 3DXSTAT ESD PA12 filament should be stored properly in order to prevent it from absorbing excess moisture. Humidity is the biggest enemy of filaments as it can result in extrusion problems, poor surface quality of the 3D printed part and a deterioration in its mechanical properties. The best way to store the 3DXSTAT ESD PA12 filament is in a sealed bag with desiccant, in a vacuum sealed container or in an intelligent filament container. During printing, the Fiber Three drying case can be used. If the 3DXSTAT ESD PA12 filament absorbs too much moisture, it should dried in a filament dryer for 4 hours at 90 ºC.