Prusa i3 MK3S+ spare parts

Silicone case to keep clean and prevent deterioration of the E3D v6 and Volcano Original HeatBreak.

The heater block most used in the world of 3D printing.

Heat Break (barrel) with HotEnd v6 1.75mm and 3mm.

Steel bases with PEI surface for Prusa printers, with smooth or textured finish.

High performance cartridge heater with 50 W of power.

Molex Microfit 3.0 adapter cables to other connectors. Allow Bondtech thermistors and heaters to be used in virtually any printer.

IR filament sensor compatible with Prusa MK2.5S and MK3S/MK3S+.

Einsy RAMBo motherboard with MK3S/MK3S+ firmware preinstalled.

Replacement IR filament sensor Einsy cable, only for Prusa MK3S/MK3S+.

Original nickel plated copper heater block for the V6 and Volcano hotends.

A customizable enclosure with add-ons for the Prusa MK3S+ 3D printer.

High-temperature heater cartridges capable of operating at up to 550 °C for extended periods of time

SD or micro SD memory card for 3D printer. 

GT2 timing belt 6 mm/9 mm. Cut in continuous lengths of 10 cm by 10 cm.

Satin powder coated steel base for Prusa 3D printers.

Special variable diameter spool holder for masterspools.

Nozzle for the original HotEnd v6, Volcano and SuperVolcano versions of E3D.

Nozzle for the original HotEnd v6 and Volcano versions of E3D for filaments with fibers.

Nozzle for the version of the original E3D HotEnd v6, specially for food and medical applications.

It allows to print any advanced material, supporting very high extrusion temperatures.

Original E3D pack of nozzles of different materials for the HotEnd E3D v6.

The most durable and accurate nozzle on the market, valid for all materials.

A nozzle made of high-speed steel alloyed with vanadium, a material with a higher hardness than hardened steel.

Nozzles of different materials and outlet diameters made by 3DSolex Bondtech.

V6 and MK8 nozzles with increased melting capacity thanks to the CHT technology developed by Bondtech.

E3D Original nickel plated copper nozzles for the v6/Volcano/Supervolcano heater blocks.

Bimetallic copper and hardened steel nozzles for high flow printing with abrasive materials.

Ultra-resistant nozzle with a diamond tip. Compatible with many systems, materials and printers.

Original E3D hotend with high printig temperature up to 285 ˚C.

Hotend upgrade kit (Copperhead or Mosquito) for Prusa i3 (MK2.5/3/3S/3S+).

Original E3D Revo drop-in replacement hotends for the Prusa Mini and Prusa MK3 hotends.

Magnetic adhesive film for easy removal with double surface made of textured and smooth PEI.

Carbon fibre printing surface that improves the adhesion of technical materials.

Prusa Flexible PA Nylon Sheet: maximum adhesion for polyamide filaments and easy removal.

Prusa Flexible PP Sheet: improved adhesion and removal for prints with polypropylene filaments.

Prusa MK52 24V Magnetic Heated Bed: fast and even heating for perfect 3D prints.

Prusa Hotend Fan: efficient and quiet, maintains optimal temperature for precise 3D printing.

LoveBoard for Nextruder Prusa: efficient connection management, status LEDs, and easy maintenance.

Thermistor for Prusa Heated Bed, Available in Various Versions Depending on the Printer Model

Original Prusa Stepper Motors for E, X, Y, and Z Axes, Designed for Maximum Precision and Reliability

Prusa WiFi Adapter: Control and Monitor Your 3D Prints Remotely

Prusa GPIO "Hackerboard": Expand and Customize Your Printer with Control over Lights, Fans, and Timelapses

Quick-Release Cable for Original Prusa Enclosure: Connect and Disconnect Quickly and Safely

White LED Strip for Original Prusa Enclosure: Bright and Even Lighting for Your Prints

Fire Suppression System for Original Prusa Enclosure: Maximum Safety for Your Prints

Prusa MK3S to MK4S Conversion Kit with Upgrades in Extrusion, Motors, Nozzle, and Connectivity.

Mainboard and Power Supply for Original Prusa Enclosure (for the filtration unit and LED)

Prusa Filtration System, fewer particles and odors for a cleaner and healthier printing environment.