Find the most suitable 3D printer for your needs.
We guide you to find the best option according to your needs.
Find the most suitable 3D scanner for your needs.
Contact us and we'll get it for you.
Find the most suitable filament for each application.
Find the most suitable resin for each application.
Find the most suitable powder for each application.
Find the most suitable pellets for each application.
Find the accessory you need for your 3D printer.
Find the ideal accessories for your 3D prints.
Do you need more than 0 units? Please, contact us.
Product temporarily out of stock with these characteristics. Select another combination.
We notify you when it will be available:
Einsy RAMBo motherboard for MK3S/MK3S+
The Einsy RAMBo motherboard comes with the firmware preinstalled for the Prusa MK3S and MK3S+ 3D printers. It is a 24V motherboard with a TMC2130 motor driver (1/256 microstepping), an Atmega 2560 main MCU, and an Atmega 32u4 USB-to-serial chip.
The Einsy RAMBo plate includes a plug aligner plastic part, two 5 A ATO blade fuses (rated for 32 V DC), and one 15 A ATO blade fuse (rated for 32 V DC).
Before the Einsy RAMBo motherboard is mounted onto the frame, the X-axis motor cable should be plugged into the motherboard like shown in step 1. Next, the textile sleeve should be gently pushed into the slot (orange arrow), leaving the cable slightly loose along the board (the cable should not be strained). The last step is to mount the Einsy base onto the Z-axis frame (marked in purple).
It should be kept in mind that the anti-static bag containing the Einsy RAMBo motherboard will be opened when the product is delivered. This is no reason for worry as it is due to the fact that each motherboard is tested before shipping.
More detailed instructions on how to mound the Einsy RAMBo motherboard can be found on the Prusa website (step 13).
Einsy RAMBo motherboard with MK3S/MK3S+ firmware preinstalled.