Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesThe storage and extrusion of common hydrosoluble support materials such as PVA and BVOH can prove problematic due to those materials' increased sensitivity to humidity. The VXL 70 support filament is a versatile and easy to print support filament developed by Xioneer as a better alternative for PVA or BVOH.
VXL 70 belongs to the Xioneer VXL family of soluble support materials whose features are impressively superior to those of BVOH and PVA, namely:
Thanks to a special proprietary Xioneer formula based on years of research, the VXL 70 support filament has great adhesion properties and high thermal stability, which makes it compatible with a wide range of materials, for example PETG, PVB, TPU, TPC, PCTG, ABS, ASA, HIPS and PA.
The VXL filaments are alkali-soluble support materials suitable for intricate 3D printed structures, typically printed with low infill and easily washed away from the model in a solution of water and VXL EX or VXL Solve (detergents designed by Xioneer especially for the VXL support materials), with the help of the Vortex EZ support removal station. The VXL 70 support material is also available as part of the VXL GO Starter Kit, aimed at users who do not have the Vortex EZ support removal station.
Solubility | Solubility |
The manufacturer recommends printing the VXL 70 support material on a bed heated to 50-70 °C and on a 3D printer with dual extrusion and a heated chamber (up to 60 ºC). Nevertheless, these parameters will largely depend on the recommended printing parameters of the main material (ABS, ASA, HIPS, PA, PCTG, PETG, PVB, TPC, TPU). The maximum extrusion temperature of 200-220 °C should not be exceeded for this filament.
Althouth the VXL 70 support material is more resistant to humidity, it should still be stored in a cool and dry environment (15-25 °C) and away from UV light to ensure the filament's optimal shelf life. The spool should be stored in its original packaging and the included desiccant can be regenerated at 80 ºC for four hours. If the original packaging is not available, VXL 70 should be stored in a vacuum sealed container with a filament drying capsule or in the DryBox EZ by Xioneer, a professional filament storage solution that ensures humidity is kept away from the material.
The VXL 70 support filament must be dissolved only in the VXL EX and VXL Solve detergents, especially designed for the VXL support filaments. This can be done with the help of the Vortex EZ support removal station by Xioneer.
Personal protection equipment (goggles, gloves, garments, shoes, breathing equipment) should always be worn and adequate room ventilation should be used when handling the VXL 70 support filament and the solvents.
General information | |
---|---|
Manufacturer | Xioneer |
Material | VXL 70 |
Format | Spool of 500 g |
Density | 1.10 g/cm3 |
Diameter of filament | 1.75 mm or 2.85 mm |
Diameter tolerance | ±0.05 mm |
Filament length | ±189.0 m (Ø 1.75 mm-0.5 Kg) ±71.3 m (Ø 2.85 mm-0.5 Kg) |
Color | Natural |
RAL/Pantone | - |
Print settings | |
Printing temperature | 200-220 ºC |
Print bed temperature | 50-70 ºC |
Chamber temperature | ≤ 60 °C |
Cooling fan | 0-100 % |
Printing speed | - |
Mechanical properties | |
Izod impact strength | - |
Charpy impact strength | - |
Elongation at break | - |
Tensile strength | - |
Tensile Modulus | - |
Flexural strength | - |
Flexural modulus | - |
Thermal properties | |
Glass transition temperature | 70 ºC |
Softening temperature | - |
Melting temperature | - |
Additional Information | |
HS Code | 3916.9 |
Spool Diameter (outer) | - |
Spool Diameter (inner hole) | 52 mm |
Spool Width | - |
* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.
200,00 €
100,00 €
67,95 €
70,00 €
25,90 €
39,55 €
181,80 €
17,35 €
187,00 €
105,00 €
109,99 €
25,95 €
149,99 €
159,99 €
108,95 €
33,80 €
37,95 €
46,95 €
175,00 €
62,92 €
69,95 €
135,52 €
159,72 €
75,02 €
56,00 €
69,99 €