Facilan C8

3D4Makers

New product

19 Items

33,50 €
33,50 €

Ask for information

Facilan C8 filament is distinguished by its strength and good interlayer adhesion.

Facilan C8 FDM is a 3D printing filament developed by 3D4Makers, a Dutch brand with many years of experience in the polymer industry. Facilan C8 is composed of perfluorooctanoic acid (PFOA), also known as C8 due to its eight-carbon chemical structure. Another component of Facilan C8 is perfluorooctanoate, a perfluorinated carboxylic acid and synthetic surfactant.

Part printed with Facilan C8 filament

Image 1: Part printed with Facilan C8 filament. Source: 3D4Makers

This filament demonstrates a higher tensile strength than ABS, higher impact resistance than PLA and its surface quality is better than that of any other FDM material.

Facilan C8 vs. ABS profilometer

Imagen 2: Facilan C8 vs. ABS profilometer. Source: 3D4Makers

Facilan C8 stands out for its strength and good interlayer adhesion properties, printing with this filament leaves virtually no visible layers and the surface finish of the material is matt and smooth to the touch.

Facilan C8 colors

Image 3: Facilan C8 colors. Source: 3D4Makers

Facilan C8 is designed specially for high throughput manufacturing and demanding end-use applications such as end use industrial parts and high end prototypes.

Impact strength (KJ/m2) 7
Elongation at break (%) 4
Tensile strength (MPa) 45
Tensile modulus (MPa) 3000
Flexural strength (MPa) 65
Flexural modulus (MPa) 3650
Surface hardness 8
Softening temperature (ºC) 55
Biodegradable Biodegradable

Facilan C8 filament print profiles are available at Ultimaker Cura.

It is recommended to 3D print the Facilan C8 filament at 180-210 ºC on a bed heated to 25-50 ºC at a speed of 40-70 mm/s. The recommended printing surface is a PEI sheet or glass.

The Facilan C8 filament has very good compatibility with support material such as PVOH. The C8 filament can be used as its own support as well, with very easy removal.

General information
Manufacturer 3D4Makers
Material Facilan C8
Format Spool of 750 g
Spool of 2300 g
Density 1.4 g/cm3
Filament diameter 1.75 mm o 2.85 mm
Diameter tolerance -
Filament length 227.7 m (Ø 1.75 mm 750 g)
84.0 m (Ø 2.85 mm 750 g)
683.0 m (Ø 1.75 mm 2300 g)
257.5 m (Ø 2.85 mm 2300 g)
Colour Natural, black, red, red, blue, green, dark grey
RAL/Pantone -
Printing properties
Printing temperature 180-210 ºC
Base/bed temperature 25-50 ºC
Chamber temperature -
Layer fan -
Recommended print speed 40-70 mm/s
Mechanical properties
Izod impact resistance (ISO 180-1) 7 kJ/m2
Charpy impact resistance -
Elongation at break (ISO 527-1) 4 % 
Tensile strength (ISO 527-1) 45 MPa 
Tensile modulus (ISO 527-2) 3000 MPa 
Bending strength (ISO 178) 65 MPa
Bending modulus (ISO 178) 3650 MPa
Surface hardness (ISO 868) 72 Shore D
Thermal properties
Softening temperature (ISO 75 B) 55 ºC
Melting temperature -
Specific properties
Transparency  -
Brightness value  -
Additional information
HS Code 3916.9


* The typical values listed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.

30 other products in the same category: