PETG Medical - Lattice Services 500 g View larger

PETG Medical - Lattice Services

Lattice Services

New product

3 Items

45,75 €
45,75 €

Ask for information

High quality PETG for chemically resistant and skin-safe applications in medical sector.

The PETG Medical filament by Lattice Services is a made from a high quality polyethylene glycol (PETG) base. PETG is an amorphous and rigid thermoplastic that does not crystalize when heated. This gives PETG a wide range of valuable features such as excellent mechanical, thermal and chemical resistance, low deformation, great printability and translucency, making PETG a great alternative to PLA, ABS or PA.

A part 3D printed with the PETG Medical filament

Image 1: A part 3D printed with the PETG Medical filament. Source: Lattice Services.

Furthermore, the PETG Medical filament is compliant with the ISO 10993-5 certification for skin contant. In combination with the translucency and chemical resistance, it makes the PETG Medical filament perfect for applications such as prototypes of medical device packaging or prototypes of MD in contact with fluids (respirators, breathing duct, suction, etc).

It must be noted that parts 3D printed with the PETG Medical filament can under no circumstance be implanted in humans. The manufacturer does not assume any responsibility for the medical use of the product and each use case must be assessed for its viability for any medical use by the user of the PETG Medical filament.

Elongation at break (%) 7
Tensile strength (MPa) 35
Translucent Translucent
Chemical resistance Chemical resistance
Medical use Medical use

Once opened, the PETG Medical filament should be stored properly to prevent it from absorbing moisture from the air. The best way to store filaments in a tightly sealed bag with desiccant, in a vacuum sealed container or in an intelligent filament container. During printing, the filament can be placed in PolyBox or the FilaDryer S2 filament dryer.

The manufacturer recommends printing PETG Medical filament at 230-245 ºC on a bed heated to 75-85 ºC. It is recommended to print at a speed of 40-70 mm/s with the layer fan on (10-50 %)

It is highly recommended to wear standard safety equipment during the printing and post-processing of parts 3D printed with the PETG Medical filament - safety goggles, gloves, breathing equipment and protective garments, according to needs.

General information
Manufacturer Lattice Services
Material PETG
Format Spool of 500 g
Density -
Filament diameter 1.75 or 2.85 mm
Diameter tolerance -
Filament length -
Colour Natural translucid
RAL/Pantone  -
Printing properties
Printing temperature 230-245 ºC
Base/bed temperature 75-85 ºC
Chamber temperature -
Layer fan 10-50 %
Print speed 40-70 mm/s
Nozzle diameter -
Mechanical properties
Izod impact resistance -
Charpy impact resistance  -
Elongation at break 7 %
Tensile strength 35 MPa
Tensile modulus -
Bending strength  -
Flexural modulus -
Surface hardness -
Thermal properties
Softening temperature  -
Melting temperature -
Specific properties
Transparency
Flammability -
Additional information
HS Code 3916.9
Spool diameter (outside) -
Spool diameter (inner bore) -
Spool width -

* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.

Accessories

30 other products in the same category: