Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesFacilan HT is an amorphous copolyester with a high glass transition temperature, higher than PETG and PLA, and with high tensile strength, superior to PETG and ABS.
Thanks to the high heat resistance of Facilan HT, it is possible to create more durable parts for heat-sensitive applications. Its high strength can optimise 3D designs with low infill for faster print jobs.
Parts printed with this filament get a shiny, glossy appearance.
Facilan HT is approved for food contact (USA, EU, Japan) and also complies with the 2009/548/EC Toy Safety Directive.
Impact strength (KJ/m2) | 3 |
Elongation at break (%) | 7 |
Tensile strength (MPa) | 62 |
Tensile modulus (MPa) | 2100 |
Flexural strength (MPa) | 85 |
Flexural modulus (MPa) | 2300 |
Surface hardness | 8 |
Softening temperature (ºC) | 89 |
Alimentary use | Alimentary use |
The manufacturer recommends printing Facilan HT filament at 240-250°C at a speed of 40-75 mm/s, on a PEI or glass surface, with a bed temperature set between 75°C and 85°C.
For further technical and safety information please refer to the "Downloads" section.
The Facilan HT filament print profile is available on the Ultimaker Cura website.
General information | |
---|---|
Manufacturer | 3D4Makers |
Material | Facilan HT |
Format | Spool of 750 g |
Density | 1.3 g/cm3 |
Filament diameter | 1.75 mm o 2.85 mm |
Diameter tolerance | - |
Filament length | 239.9 m (Ø 1.75 mm) 90.4 m (Ø 2.85 mm) |
Colour | Natural translucent |
RAL/Pantone | - |
Printing properties | |
Printing temperature | 240-250ºC |
Base/bed temperature | 75-85ºC |
Chamber temperature | - |
Layer fan | - |
Recommended print speed | 40-70 mm/s |
Mechanical properties | |
Izod impact resistance (ISO 180-1) | 3 kJ/m2 |
Charpy impact resistance | - |
Elongation at break (ISO 527-1) | 7 % |
Tensile strength (ISO 527-1) | 62 MPa |
Tensile modulus (ISO 527-2) | 2100 MPa |
Bending strength (ISO 178) | 85 MPa |
Bending modulus (ISO 178) | 2300 MPa |
Surface hardness (ISO 868) | 76 Shore D |
Thermal properties | |
Softening temperature (ISO 75 B) | 89 ºC |
Melting temperature | - |
Specific properties | |
Transparency | - |
Brightness value | - |
Additional information | |
HS Code | 3916.9 |
* The typical values listed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.
16,45 €
110,00 €
25,25 €
44,95 €
29,95 €
29,99 €
41,95 €
44,95 €
44,45 €
56,95 €
99,99 €
40,25 €
5,18 € -60% 12,95 €
67,75 €
37,10 €
44,00 €
44,00 €
109,00 €
32,15 €
30,99 €
31,46 €
42,95 €
40,00 €
75,00 €
37,56 €
21,04 €
23,51 €
67,14 €
79,99 €
30,00 €