Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Facilan™ HT

Ref.: FACILAN-HT-175-750

35.00 €

Tax excl.

Diameter

Format

Colour

Quantity

In stock 2 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Monday 16 September

Available

Returns

Ask about this product

Facilan HT is an amorphous copolyester with a high glass transition temperature, higher than PETG and PLA, and with high tensile strength, superior to PETG and ABS.

Part printed with Facilan HT filament

Image 1: Part printed with Facilan HT filament. Source: 3D4Makers.

Thanks to the high heat resistance of Facilan HT, it is possible to create more durable parts for heat-sensitive applications. Its high strength can optimise 3D designs with low infill for faster print jobs.

Comparison of Facilan HT filament with PLA, PETG and ABS

Image 2: Comparison of Facilan HT filament with PLA, PETG and ABS. Source: 3D4Makers.

Parts printed with this filament get a shiny, glossy appearance.

Facilan HT is approved for food contact (USA, EU, Japan) and also complies with the 2009/548/EC Toy Safety Directive.

General information
Material	PETG
Format	0.75 kg
Density	1.3 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	- mm
Filament length	(Ø 1.75 mm) 239.9 m / (Ø 2.85 mm) 90.4 m

Printing properties
Printing temperature	240 - 250 ºC
Print bed temperature	75 - 85 ºC
Chamber temperature	-
Cooling fan	-
Recommended printing speed	40 - 70 mm/s

Mechanical properties
Izod impact strength	(ISO 180) 3 KJ/m²
Elongation at break	(ISO 527) 7 %
Tensile strength	(ISO 527) 62 MPa
Tensile modulus	(ISO 527) 2100 MPa
Flexural strength	(ISO 178) 85 MPa
Flexural modulus	(ISO 178) 2300 MPa
Surface hardness	(ISO 868) Shore 76 D

Thermal properties
Softening temperature	(ISO 75) 89 ºC

Specific properties
Chemical resistance	✓

Other
HS Code	3916.9
Spool diameter (outer)	- mm
Spool diameter (inner hole)	- mm
Spool width	- mm

The manufacturer recommends printing Facilan HT filament at 240-250°C at a speed of 40-75 mm/s, on a PEI or glass surface, with a bed temperature set between 75°C and 85°C.

For further technical and safety information please refer to the "Downloads" section.

The Facilan HT filament print profile is available on the Ultimaker Cura website.