Drywise Filament Dryer
search
  • Drywise Filament Dryer
  • Drywise Filament Dryer
  • Drywise Filament Dryer
  • Drywise Filament Dryer
Compare
You must be logged in to manage your wishlist.

Drywise Filament Dryer

DRYWISE-FIL-DRYER-175
1,899.00 € 1,899.00 €
Tax excl.
Diameter
Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 10 - 14 days Available for shipment within 10 - 14 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 29 November - Thursday 5 December
Available

Drywise is an active inline filament drying device intended for 1.75 mm and 2.85 mm filaments, for users of industrial desktop 3D printers and for specific engineering filaments. The brand Drywise is part of Thought3D, the manufacturer of the famous Magigoo adhesive.

Video 1: The Drywise filament dryer. Source: Drywise.

Some of the materials compatible with the Drywise filament dryer are shown in the table below. A full and regularly updated list of compatible materials is available on the website of the manufacturer.

Filament Manufacturer Material
Polymaker CoPA Polymaker PA 6/6-6
PolyMide PA-CF 6 and 12 PA CF 6, PA CF 12
Nylon 230 Taulman 3D PA 230
Nylon 680 FDA PA 680
Nylon Alloy 910 PA Alloy 910
Nylon Natural 645 PA 645
Nylon Bridge PA
Essentium PA CF Essentium PA CF
Table 1: Materials compatible with the Drywise filament dryer. Source: Drywise.

Plastics tend to absorb moisture from the surrounding air (hygroscopy), especially, Nylon, PC and PET. If a filament is not stored and dried properly, as is extruded, the accumulated moisture rapidly expands, boils and ruptures, forming bubbles in the extruded plastic.

The effects of humidity on extruded filament

Image 1: The effects of humidity on extruded filament. Source: Drywise.

This leads to surface quality issues, also known as artifacts, poor adhesion and structural defects in the 3D printed part. Using the Drywise filament dryer is an effective way to avoid filament degradation and ensure the highest quality of prints with engineering materials.

The effects of humidity on extruded filamentThe effects of humidity on extruded filament

Image 2: 3D prints without and with the use of the Drywise filament dryer. Source: Drywise.

In Image 2 the difference can be seen between parts 3D printed with the same material and on the same 3D printer, one without the use of the Drywise filament dryer (left in each photo) and the other with the use of Drywise (right in each photo).

While traditional drying methods (for example in an oven) can take up to 48 hours, damage the filament or the spool, and still be ineffective and imprecise as the user has to guess or estimate the drying parameters for a given material.

The Drywise filament dryer only takes about 50 minutes to pretreat the filament before the 3D printing process starts. During 3D printing, Drywise only dries the section of filament that is 3D printed, which speeds up the process. Furthermore, Drywise comes with pre calibrated settings, adapted to the specific material chosen by the user.

The user interface for material selection

Image 3: The user interface for material selection. Source: Drywise.

Inline means that the Drywise filament dryer dries the filament on the go, during the printing process, which eliminates the need for countless hours of filament drying before printing, and risking the filament absorbing moisture anyway. The filament is fed through a guided input and output port.

Furthermore, the Drywise filament preheater add-on (visible in Image 4 above the desiccant tube) can be purchased separately to help pre-dry very hygroscopic materials before they enter the dryer.

Two different setups with the Drywise filament dryer and a 3D printerTwo different setups with the Drywise filament dryer and a 3D printer

Image 4: Two different setups with the Drywise filament dryer and a 3D printer. Source: Drywise.

The Drywise filament dryer is not only fast but also intelligent, safe, user friendly, and upgradable. Drywise is constantly expanding the list of compatible materials, certified for use with the device, with calibrated settings included. The device is equipped with smart sensors that help avoid the overheating and overdrying of the filament. The same sensors also detect moments of inactivity and turn off the heaters to ensure safety.

The user-friendly interface consists of a 4.3” touch panel, LED lights and auditory signals. The user interface is intuitive and alerts the user in case of any error or malfunction through notifications on the screen, and red and green LED lights. The screen displays warnings for various occurrences, such as the need to change or connect the desiccant, check the o-rings on the filament ports, or in case no filament movement is detected or when the user has loaded a filament incompatible with the device.

The Drywise filament dryer is an excellent option for the drying of engineering filaments without having to guess the parameters or wait countless hours for the filament to dry. Drywise allows for a much faster and agile 3D printing process with excellent results, eliminating humidity from filaments and saving the user’s time and material.

General information
Manufacturer Drywise
Certificates CE, FCC, UKCA, ISED

Electrical properties
Power 100 - 240 V AC, 50-60 Hz (350 W)

Dimensions and weight
Dimensions 520 x 500 x 145 mm
Weight 12 Kg

Specific properties
Filament diameter 1.75 / 2.85 mm

Other
HS Code 8516.8

So far, the Drywise filament dryer is intended only for specific materials. Using the device with any other filaments can damage the filament and the device. If the Drywise device does not have a profile for a given filament, the user should double check the compatibility list or contact the manufacturer before attempting to use the material. Damage caused to the Drywise filament dryer by using an incompatible material is not covered under warranty. For more detailed material guidelines, see the user manual available in the Downloads section.

Some materials, especially reinforced with CF and GF, or resin based filaments, will require the use of the Drywise Pre-Heater before the Drywise filament dryer is used. The Drywise user interface will indicate whenever there is a need to use the Pre-Heater.

Before mounting the Drywise filament dryer, the user should make sure that the package is not damaged and that it contains all the elements necessary for assembling the device.

The contents of the Drywise filament dryer box

Image 1: The contents of the Drywise filament dryer box. Source: Drywise.

The box should contain the following elements:

  • A - Drywise device.
  • B - Power cord.
  • C - Desiccant tube with desiccant x 2
  • D - Filament tip sharpener.
  • E - Spare o-rings.
  • F - Port closing kit.
  • G - Heat resistant gloves.
  • H - USB to USB-C cable.
  • I - Spool holder.
  • J - SD card.
  • K - User manual.

The exact assembly, operation and maintenance instructions can be found in the User Manual available in the Downloads section. The device should be placed upright on a flat and stable surface, in an ambient temperature of 15-35 ºC, out of direct sunlight, and away from liquids and humidity. There should be at least 10 cm of free space to the right of the device for unrestricted airflow. The filament must be able to move without obstructions from the dryer to the 3D printer. Protective gloves should always be worn when freshly dried filament is handled, as it may be too hot and cause burns.

Viewed products