Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Rigid X

Ref.: ADDN-RIGIDX-175-1000

67.75 €

Tax excl.

Diameter

Format

Colour

Quantity

In stock 3 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 13 September

Available

Returns

Ask about this product

Addnorth is a Swedish 3D printing filament manufacturer renowned for producing very high quality filaments, as well as for the strong development of materials for science and engineering applications.

Rigid X is a carbon fibre reinforced PETG-based filament.

Carbonfil's base component, PETG, is a thermoplastic copolyester (extruded polyethylene terephthalate glycol copolyester). PETG is a modified version of the simpler PET. It is a non-toxic thermoplastic polymer widely used in the manufacture of clothing and products such as containers. Unlike PET filaments, PETG filaments do not crystallise on heating and are therefore very tough and flexible, as well as chemically resistant (it is resistant to water, acids, alkalis and alcohols).

The combination of PETG and carbon fibres means that Rigid X filament combines the main properties of PETG, such as its excellent chemical resistance, heat resistance and UV resistance, with the added rigidity provided by the carbon fibre. This filament is ideal for a wide range of demanding applications, such as vehicle parts, accessories or jigs.

Parts printed with Rigid X.

Image 1: Parts printed with Rigid X. Source: Addnorth.

Parts made from the filament have good mechanical properties, but with a similar ease of printability to PLA, thanks to the excellent interlayer adhesion and low warpage of Addnorth's Rigid X filament.

In addition to all its mechanical properties and printability, the Rigid X filament's matt black finish makes it attractive even for architectural and design applications.

Matt black finish of Rigid X filament.

Image 2: Matt black finish of Rigid X filament. Source: Addnorth.

As with other loaded filaments (Nylon AF80, Carbonfil, CPE CF112 Carbon, etc.), it is recommended to use a nozzle with at least 0.5 mm exit diameter to avoid possible clogging.

In addition, carbon fibre can be quite abrasive and can cause wear on standard brass nozzles, so it is recommended to use a hardened steel nozzle such as the E3D hardened steel nozzle or the MK8 hardened steel nozzle.

Due to its versatility, mechanical properties and excellent surface finish, this material is highly recommended for the manufacture of functional prototypes as well as final parts.

General information
Material	PETG
Format	1000 g
Density	(ISO 527) 1.32 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	± 0.025 mm
Filament length	(1.75 mm) ± 315 / (2.85 mm) ± 118

Printing properties
Printing temperature	245 - 265 ºC
Print bed temperature	60 - 70 ºC
Chamber temperature	-
Cooling fan	✗
Recommended printing speed	30 - 50 mm/s

Mechanical properties
Elongation at break	(ISO 527) 8 %
Tensile strength	(ISO 527) 52 MPa
Tensile modulus	(ISO 527) 5120 MPa
Flexural strength	(ISO 178) 89 MPa
Flexural modulus	(ISO 178) 4930 MPa
Surface hardness	-
Impact strength	5 KJ/m²

Thermal properties
Softening temperature	82 ºC

Specific properties
Transparency	✗
Chemical resistance	✓

Other
HS Code	3916.9
Spool diameter (outer)	200 mm
Spool diameter (inner hole)	52 mm
Spool width	55 mm

It is recommended to print Rigid X filament at a temperature of 245 - 260 ºC and a temperature of 60 - 70 ºC on the hot bed.

Rigid X filament works on any type of printing base and has excellent adhesion to the printing base. However, to ensure perfect adhesion of the material to the substrate, it is possible to use BuildTak, DimaFix, PrintaFix or Magigoo.

Due to the carbon fibre loads that wear out the brass extruders, it is advisable to use a hardened steel nozzle and it is also advisable to use cleaning filament at the end of printing with this filament.

Rigid X filament is a hygroscopic material. It is recommended to store the material in a vacuum-sealed bag with desiccants, or a vacuum-sealed filament container such as those from PrintDry. In case of moisture absorption, it is recommended to dry the filament in a filament dryer such as PrintDry Pro.