Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

PC Medical - Lattice Services

Ref.: LATTICE-PCMED-TRANSL-175-500

49.92 €

Tax excl.

Diameter

Format

Colour

Quantity

In stock 3 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 13 September

Available

Returns

Ask about this product

The PC Medical filament by Lattice Services is a polycarbonate based medical grade filament certified for contact with skin (ISO 10993-5) and sterilizable via gamma rays, ETO and autoclave. This makes the PC Medical ideal for applications in contact with the skin as well as for parts that will be used in the operating room for guided surgeries (surgical guides, cutting guides, medical instruments).

Parts 3D printed with the PC Medical filamen

Image 1: Parts 3D printed with the PC Medical filament. Source: Lattice Services.

The PC Medical filament prints translucent parts with blue reflections, as seen in Image 1. The parts made with this material are characterized by high mechanical strength, great thermal resistance and excellent chemical resistance, features typical of PC. The chemical resistance makes the PC Medical filament suitable for applications in contact with fluids (respirators, breathing duct, suction).

It must be noted that parts 3D printed with the PC Medical filament can under no circumstance be implanted in humans. The manufacturer does not assume any responsibility for the medical use of the product and each use case must be assessed for its viability for any medical use by the user of the PC Medical filament.

General information
Material	PC
Format	0.5 kg
Density	1.19 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	- mm
Filament length	(Ø1.75 mm, 0.5 kg) ±174.7 m / (Ø2.85 mm, 0.5 kg) ±65.9 m

Printing properties
Printing temperature	255 - 275 ºC
Print bed temperature	120 - 140 ºC
Chamber temperature	-
Cooling fan	0 - 50
Recommended printing speed	20 - 40 mm/s

Mechanical properties
Elongation at break	15 %
Tensile strength	60 MPa
Tensile modulus	2100 MPa
Flexural strength	90 MPa
Flexural modulus	2100 MPa
Surface hardness	-
Impact strength	20 KJ/m²

Thermal properties
Softening temperature	118 ºC

Specific properties
Transparency	✓
Chemical resistance	✓

Other
HS Code	3916.9
Spool diameter (outer)	- mm
Spool diameter (inner hole)	- mm
Spool width	- mm

Once opened, the PC Medical filament should be stored properly to prevent it from absorbing moisture from the air. The best way to store filaments in a tightly sealed bag with desiccant, in a vacuum sealed container or in an intelligent filament container. During printing, the filament can be placed in PolyBox or the FilaDryer S2 filament dryer.

The manufacturer recommends printing PC Medical filament at 255-275 ºC on a bed heated to 120-140 ºC. It is recommended to print at a speed of 20-40 mm/s with the layer fan on (0-50 %) in a closed printer.

It is highly recommended to wear standard safety equipment during the printing and post-processing of parts 3D printed with the PC Medical filament - safety goggles, gloves, breathing equipment and protective garments, according to needs.