It allows to print any advanced material, supporting very high extrusion temperatures.

High performance polyamide 12 with a tensile strength of 45MPa.

Filament with a polypropylene base and 30% fiberglass, with very high voltage module.

Extruder with high performance combined with a low weight, thanks to the Dual-Drive system.

Designed specifically for lost wax casting applications and to be used by any 3D printer.

All the advantages and ease of printing of PETG with the high mechanical strength of carbon fiber.

Tool for exchanging any type of nozzle with total safety.

Filament made of sandstone that recreates a surface finish similar to stone or ceramic.

Semi-flexible and hard high-performance polyamide 12 that withstands temperatures up to 180 °C.

Container where the resin using Form 3 and is located.

2.85mm Brass Nozzle original from the Ultimaker 2.

It is less fragile than standard PLA filament and characterized by greater resistance to temperature.

Industrial material with high flexibility and chemical resistance for final parts and functional prototypes.

The heater block most used in the world of 3D printing.

7mm wrench for mounting and unmounting the E3D nozzle.

PLA filament with wood fibres with a similar appearance and texture to this material.

New element belonging to the family Porolay, characterized as sparkling and highly porous.

Container where is the resin that Form 2 uses for 3D SLA impressions.

Tool to improve the finish of 3D printed parts easily and without excessive adjustment.

Material with good mechanical properties and that allows an almost 100% translucent finish.

Highly flexible and chemically resistant material, suitable for final parts and functional prototypes.

Filament formed by flexibly PLA and small reflective particles that reflect light intensively.

High quality PETG filament with excellent mechanical and aesthetic properties.

Innovative filament PETT by Taulman, stands out for its high transparency and resistance.

BLTouch Smart is one of the most advanced and repeatable 3D printer levelling sensors on the market.

Temperature sensors that vary the resistance depending on the temperature at which they are exposed.

Original E3D hotend with high printig temperature up to 285 ˚C.

Steel bases with PEI surface for Prusa I3MK3S and Prusa Mini, with smooth or textured finish.

Feeler gauge is a key tool to perfectly adjust the 3D printer.

The caliper is an indispensable tool to take accurate measurements.

The most elastic filament on the market, reaching 950% stretch.

High quality recycled PLA filament with less environmental impact

Filafresh^® filaments are scented TPU-based flexible filaments with excellent properties.

Semi-flexible Shore 96A hardness filament with high chemical resistance and a matt and soft finish.

Resistant to friction material that offers a response to wear even in humid and cold environments.

Waterproofing valid for all existing materials for 3D printing.

Filament made from wood fibers recreates a similar wood finish.

Ultra fast curing glue perfect for 3D printing.

Developed specifically to fulfill FDA regulation 21 CFR 177.1500 (contact with food).

PLA filament with stone particles with similar appearance and texture to this material.

PETG MDT is detected by all types of metal detectors, without being composed of any contaminating element.

PETG ideal for printing small details, aimed at medical applications and clinical (complies ISO 10993).

New sparkling filament, with a porous structure, formed by the combination TPE and PVA.

Storage box to keep filaments filaments in perfect condition while printing.

Tape roll recommended to reduce the warping effect on 3D printing.

Natural PLA pellets for making filaments for 3D printing with an extruder.

The heat shrink tube is a wrapper to isolate and strengthen mainly the electronics cables.

Filament manufactured specifically for 3D printers of the XYZprinting brand (Nano, Mini and Junior models).