You must be logged in to manage your wishlist.
Blue Tape 50mmx50M
BTAP-50
17.35 €
Tax excl.
Blue Tape Roll for 3D printing base, the roll is 50mm wide and 50 meters long. This tape is recommended to ensure adhesion between the base of 3D printed and 3D printing piece (reduce the warping effect). It can be used with all those types of filament for 3D printing in the hot base has not be above 40 ° C. In the case of a filament need to print requiring a bed temperature above 40 ºC printing should be used Kapton Tape or BuildTak.
The Blue Tape has the advantage that it is very easy to remove although a long period has passed since accession.
General information |
|
| Manufacturer | 3M |
Dimensions and weight |
|
| Dimensions | Ø 91 mm x 48 mm x 50 m |
Other |
|
| HS Code | 4811.4 |
For the correct positioning of the tape at the base of the printer must set the tape at one end of the base of the 3D printer and after unrolling the necessary amount should be tensioned and adhere to the base so that it is completely smooth. Repeat this procedure throughout the operational area required.
Related products
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
Tape roll recommended to reduce the warping effect on 3D printing.