Taulman Nylon 645 Natural

Taulman3D

New product

33 Items

59,95 €
59,95 €

Ask for information

It has a greater resistance than Taulman Nylon 618 filament at the cost of reduced flexibility.

Nylon, also called polyamide (PA), is a synthetic plastic, which is very common in a wide range of products. But, in this case, it is about a nylon especially designed for being used in 3D printers. With Taulman Nylon 645, you will obtain flexible but resistant objects.

Besides, by using clothing dye, colour can be directly applied on this filament. In this way, figures in many combined colours can be obtained. We recommend you reading about this matter in our forum if you want further information about how to apply colour to the nylon. Nylon, also called polyamide (PA) is a common synthetic plastic in a variety of products.

Taulman Nylon 645 is designed specifically for 3D printing applications being easy to print unlike other generic nylon filaments that can be found on the market. Taulman Nylon 645 has excellent adhesion to the surface, reducing water absorption and the tear strength. Taulman Nylon 645 is finished in bright natural white color having a translucent surface (65% transparency). With Taulman Nylon 645 you can get flexible objects, but that also have a high resistance.


In addition to this filament is you can apply color directly with a dye for clothes, thus figures can be obtained even in multiple colors combined. If you want to get really spectacular finishes can apply specifically coating designed for 3D printing such as XTC-3D.

Nylon Taulman 645 has properties superior to Taulman 618 Nylon resistance expense of being 20% ​​less flexible. You can get as strong pieces such as injection molded parts. Also don´t emit smoke in print and machinability. Has the same chemical resistance than nylon Taulman 618 but is also 20% more resistant to chlorine. It is a polymer widely used in the industry for its high durability.

Elongation at break (%) 186
Tensile strength (MPa) 35
Tensile modulus (MPa) 212
Softening temperature (ºC) 52
Flexibility Flexibility
Machinable Machinable
Chemical resistance Chemical resistance
Hide color variations (Hide color variations)

The extruder recommended temperature is 242ºC.

To ensure the correct adhesion of the Taulman Nylon 645 to the base, it's recommended to use BuildTakDimaFixPrintaFix or Magigoo PA. In addition to this adhesive it has been developed exclusively for nylon filaments and can be used with a microperforated base, PEI sheets or Kapton Tape can be used. It must be ensured that the adhesion of the first layer is firm and strong to prevent it from peeling off during 3D printing.

During the printing process you may see smoke coming out of the extruder, do not be scared, it's just steam. This is because nylon has a great capacity to absorb moisture. For this reason, we recommend that after using it on your 3D printer, store your nylon coil together with the absorbent silica bag in the original bag. Close the bag so that it is as sealed as possible and store it in a dry place.

General information
Manufacturer Taulman (USA)
Material Nylon (PA)
Format Pack of 50 g
Spool of 0.45 kg
Spool of 1 kg
Density 1.25 g/cm3
Diameter of filament 1.75 or 2.85 mm
Diameter tolerance ±0,05 mm
Filament length ±149 m (Ø 1.75 mm-0.45Kg)
±56 m (Ø 2.85 mm-0.45Kg)
Color Bright natural white
RAL/Pantone -
Print settings
Printing temperature 230-265ºC (ideal 245ºC)
Print bed temperature 30-65ºC
Chamber temperature Not necessary
Cooling fan Not recommended
Mechanical properties
Izod impact strength -
Charpy impact strength -
Elongation at break 186%
Tensile strength 35 MPa
Tensile Modulus 212 MPa
Flexural strength  -
Flexural modulus -
Surface hardness  -
Thermal properties
Softening temperature 52ºC
Melting temperature 217ºC
Specific properties
Transparency  No
FDA certification No
Inflammability (UL 94 HB) Yes 
Chemical resistance Alcohols, Resins + MEK, Oils, Acetone, Chlorines, etc.
Additional Information
HS Code 3916.9
Diameter coil (outer) 200 mm 
Diameter coil (inner hole) 50 mm 
Coil Width 50 mm 


* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.

30 other products in the same category: