Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesWarning: Last items in stock!
Availability date:
Taulman nylon Bridge (or polyamide) is a plastic of high available quality for the 3D printing. It is born with the end to be a filament “Bridge or union” between the high resistance and flexibility of the Taulman Nylon 645 and the price reduced of the ABS and the thermoplastic PLA. It is practically the same of resistant that the Taulman Nylon 645 but to his time is very flexible. It allows to any user print pieces with these characteristics of resistance and flexibility to an affordable price surpassing the current barriers of other filaments of nylon. This filament of nylon is produced by Taulman 3D especially for the 3D printed.
The main characteristics of the Taulman nylon Bridge are the following:
Besides it presents a practically invalid contraction, by what is besides a good material to print big pieces.
Elongation at break (%) | 248 |
Tensile strength (MPa) | 33 |
Tensile modulus (MPa) | 183 |
Softening temperature (ºC) | 52 |
Flexibility | Flexibility |
Hide color variations | (Hide color variations) |
It is advisable that the printer dock is warm with placing BuildTak or Kapton Tape for which adheres well and thus achieve a better result print (Minimize the most of the warping effect). The recommended temperature of 252 ° C extruder is.
During the printing process can you see smoke coming from the extruder, do not panic, it's just water vapor. This is because the nylon has a great capacity to absorb moisture. For this reason we recommend that after use in your 3D printer save your spool nylon bag with the absorbent silica in the original bag. Close the bag so that it is the best possible sealed and store in a dry place.
General information | |
---|---|
Manufacturer | Taulman (USA) |
Material | Nylon (PA) |
Format | Pack of 50 g Spool of 0.45 kg Spool of 1 kg |
Density | 1.25 g/cm3 |
Diameter of filament | 1.75 or 2.85 mm |
Diameter tolerance | ±0,05 mm |
Filament length | ±149 m (Ø 1.75 mm-0.45Kg) ±56 m (Ø 2.85 mm-0.45Kg) |
Color | Natural |
RAL/Pantone | - |
Print settings | |
Printing temperature | 250-252ºC |
Print bed temperature | 30-65ºC |
Chamber temperature | Not necessary (recommended 30-100ºC) |
Cooling fan | Not recommended |
Mechanical properties | |
Izod impact strength | - |
Charpy impact strength | - |
Elongation at break | 248% |
Tensile strength | 33 MPa |
Tensile Modulus | 183 MPa |
Flexural strength | - |
Flexural modulus | - |
Surface hardness | - |
Thermal properties | |
Softening temperature | 52ºC |
Melting temperature | 217ºC |
Specific properties | |
Transparency | Low (42%) |
FDA certification | No |
Inflammability (UL 94 HB) | Yes |
Additional Information | |
HS Code | 3916.9 |
Diameter coil (outer) | 200 mm |
Diameter coil (inner hole) | 50 mm |
Coil Width | 50 mm |
* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.
42,98 €
66,94 €
30,65 €
53,00 €
69,95 €
47,95 €
132,95 €
59,95 €
68,00 €
175,00 €
140,00 €
32,00 €
68,00 €
147,95 €
142,95 €
142,95 €
137,95 €
110,00 €
95,00 €
145,00 €
175,00 €
189,99 €
239,99 €
33,45 €
156,00 €
146,00 €
57,75 €