OBC 905
search
Compare
You must be logged in to manage your wishlist.

OBC 905

FILL-OBC-950-NAT-175-600
65.00 € 65.00 €
Tax excl.
Diameter
Format
Colour
Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Out of Stock

Fillamentum, a renowned Czech manufacturer of 3D printing filaments, has a range of materials for professional use called Fillamentum Industrial. Fillamentum Industrial stands out for its filaments with specific properties for various applications in the industrial sector, such as OBC 905.

OBC 905 is a filament made from OBC (olefin block copolymer). It is a revolutionary and innovative material made with Imagin3D™ OBC Polyethylene from DOW, one of the world's leading chemical companies.

Parts 3D printed with OBC 905

Image 1: Parts 3D printed with OBC 905. Source: Fillamentum.

OBC 905 is considered an elastomer material and has high impact and wear resistance, low moisture absorption, and resistance to much higher temperatures than other elastomers without deformation (up to 100°C). In addition, OBC 905 is a lightweight material with a density of 0.905 g/cm3.

Some of its most outstanding properties are:

  • High chemical resistance to acids, alkalis, alcohols, glycols and water.
  • Good electrical insulator.
  • Barrier properties: Low permeability to gases.
  • Low-sticky surface that does not get wet.

In addition, parts 3D printed with this material have a certain flexibility for about a week.

Test tube caps 3D printed with OBC 905

Image 2: Test tube caps 3D printed with OBC 905. Source: Fillamentum.

In terms of properties related to the 3D printing process, this material has a high adhesion between layers, which facilitates printing and considerably reduces the possibility of cracking in the manufacture of parts. Parts 3D printed with OBC 905 are smooth to the touch, providing a quality surface finish.

Thanks to its properties and low density, this material enables lightweight and exceptionally durable 3D printed parts for a variety of industries and applications that require the use of a lightweight, electrically insulating and chemical resistant material.

General information
Material OBC
Format 50 g / 600 g
Density 0.9 g/cm³
Filament diameter 1.75 mm
Filament tolerance ±0.05 mm
Filament length (Ø 1.75 mm-0.05 Kg) ±23 m / (Ø 1.75 mm-0.6 Kg) ±275.6 m

Printing properties
Printing temperature 195 - 215 ºC
Print bed temperature 90 - 105 ºC
Chamber temperature -
Cooling fan 25 - 50 %
Recommended printing speed 20 - 40 mm/s

Mechanical properties
Izod impact strength (ASTM D256) 34 KJ/m²
Elongation at break (ASTM D1708) 700 %
Tensile strength (ASTM D1708) 14 MPa
Tensile modulus - MPa
Flexural strength (ASTM D790) 7.8 MPa
Flexural modulus (ASTM D790) 244 MPa
Surface hardness (ISO 7619) Shore 53 D

Electrical properties
Volumetric resistivity 10¹⁶ Ohm/cm

Thermal properties
Melting temperature (ISO 11357) 130 ºC
Softening temperature 100 ºC

Specific properties
Transparency ✗
Chemical resistance ✓

Other
HS Code 3916.9
Spool diameter (outer) - mm
Spool diameter (inner hole) - mm
Spool width - mm

In order to ensure filament longevity and avoid extrusion problems and surface issues with the part, it is highly recommended to store the OBC 905 filament in a dry environment at all times to prevent moisture aborption. The spool should be stored in a resealable bag with a filament drying capsule, in a vacuum sealed container, an intelligent filament container before printing. During printing, the filament can be placed in a filament drying case. 

The manufacturer recommends using Magigoo PP in order to improve the adhesion of parts 3D printed with the OBC 905 filament to the printing surface. In case of adhesion problems, the "brim" setting can be chosen in the slicing software. The best printing surface for OBC 905 is glass or PEI.

The optimal extrusion parameters for the OBC 905 filament are a printing temperature of 195-215 ºC, on a bed heated to 90-105 ºC. The printing speed should be set to 20-40 mm/s (30-35 mm/s is a good starting point) and the layer fan should be at 25-50 % (from fifth layer). If the 3D printed parts have elements such as overhangs or supports, it may help to set the fan to up to 75 %. It should, however, be kept in mind that excessive cooling may cause warping. A heated chamber is not required but it can certainly help should signs of warping be noticed on the part.

Featured properties

Printing temperature
195 - 215 ºC
Filament diameter
1.75 mm
Density
0,9 g/cm³

Related products