We will remain closed until January 1st due to the Christmas holidays. Orders received until Thursday, December 26th will be shipped on Friday, December 27th. Orders received from Friday, December 27th will be shipped on January 2nd. Happy Holidays!

Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

ABS Medical - Lattice Services

Ref.: LATTICE-ABSMED-NATURAL-175-500

41.58 €

Tax excl.

Diameter

Format

Colour

Quantity

In stock 5 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Thursday 26 December

Available

Returns

Ask about this product

The ABS Medical filament by Lattice Services is an acrylonitrile butadiene styrene material certified for contact with skin (ISO 10993-5) and sterilizable via gamma rays and ETO. The ABS Medical filament is an amorphous polymer ideal for the additive manufacturing of surgical planning models or prototypes of electronic patient monitoring devices that will come into contact with the patient's skin.

Parts 3D printed with the ABS Medical filament

Image 1: Parts 3D printed with the ABS Medical filament. Source: Lattice Services.

The ABS Medical filament comes in ivory color and is characterized by high thermal resistance (degradation temperature of >250 ºC, glass transition temperature of 95-115 ºC), low deformation, good mechanical resistance and good impact resistance.

It must be noted that parts 3D printed with the ABS Medical filament can under no circumstance be implanted in humans. The manufacturer does not assume any responsibility for the medical use of the product and each use case must be assessed for its viability for any medical use by the user of the ABS Medical filament.

General information
Material	ABS
Format	0.5 kg
Density	1.04 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	- mm
Filament length	(Ø1.75 mm, 0.5 kg) ±199.9 m / (Ø2.85 mm, 0.5 kg) ±75.4 m

Printing properties
Printing temperature	220 - 240 ºC
Print bed temperature	100 - 115 ºC
Chamber temperature	-
Cooling fan	0 - 5 %
Recommended printing speed	20 - 50 mm/s

Mechanical properties
Elongation at break	36 %
Tensile strength	41 MPa
Tensile modulus	- MPa
Flexural strength	- MPa
Flexural modulus	- MPa
Surface hardness	-

Thermal properties
Softening temperature	- ºC

Other
HS Code	3916.9
Spool diameter (outer)	- mm
Spool diameter (inner hole)	- mm
Spool width	- mm

Once opened, the ABS Medical filament should be stored properly to prevent it from absorbing moisture from the air. The best way to store filaments in a tightly sealed bag with desiccant, in a vacuum sealed container or in an intelligent filament container. During printing, the filament can be placed in PolyBox or the FilaDryer S2 filament dryer.

The manufacturer recommends printing ABS Medical filament at 220-240 ºC on a bed heated to 100-115 ºC. It is recommended to print at a speed of 20-50 mm/s with the layer fan on (0-5 %) in a closed printer.

It is highly recommended to wear standard safety equipment during the printing and post-processing of parts 3D printed with the ABS Medical filament - safety goggles, gloves, breathing equipment and protective garments, according to needs.