> >Form Wash
Form Wash View larger

Form Wash

FORM-WASH

Formlabs

This product could be delivered in a period exceeding the standard.

New product

599,00 €
599,00 €

Ask for information

Form Wash is an automated washing center for 3D prints made with FormLabs Form 2.

Add to wishlist

Form Wash is one of the elements that FormLabs has to automate the post-processing of parts manufactured in Form 2.

Once an impression is completed on Form 2, the printing base (including the part) is removed and inserted into the Form Wash, without the need to put gloves on or take off the part of the printing base. Once placed in the Form Wash, the appropriate time must be chosen for each type of resin, which is approximately 15 minutes with isopropyl alcohol (IPA). During the wash an agitator moves all the fluid so that it reaches all corners of the piece and evenly. Once the programmed time has elapsed, the piece automatically rises to stop being in contact with the alcohol and dry in the open air. This prevents the piece from softening or even becoming deformed by being too long in contact with the IPA.

Form Wash

Image 1: Automatic lifting. Source: FormLabs

The Form Wash has a capacity of 8.6 liters of isopropyl alcohol, enough to wash approximately 70 impressions. The Form Wash has two elements that help the user know when to change alcohol. One is the hydrometer, which controls the saturation of the IPA and indicates when it is recommended to change it. The other is a siphon pump that makes it very easy to transfer the IPA in and out of the wash bucket.

It is advisable for all users of Form 2 to have a Form Wash to automate post-processing and at the same time save time and money.

When larger, and for the printing process to be fully automated, FormLabs has a curing unit called Form Cure, necessary to achieve the maximum mechanical properties of each type of resin.

Video 1: Form 2 Ecosystem. Source: FormLabs

Form Wash Settings

Download
ModelForm Wash
Fabricant FormLabs (Massachusetts, EEUU)
Certificates CE
Dimensions 260 x 293 x 340 mm
Weight 7 kg
Bucket Volume 8.7 l
Maximum part size 145 x 145 x 175 mm
Suggested operating environment 18ºC - 28ºC
Input AC 90-240V / AC 6A / 50-60Hz / 144W
Included accessories 1x Wash bucket
1x Wash basket
1x Hydrometer
1x Siphon pump
1x Part removal tool
1x Scraper
1x Tweezers
1x Flush cutters

30 other products in the same category:

Filament2Print © All rights reserved

DATIVIC S.L. CIF/VAT: ESB70460423

Pol. Ind. Porto do Molle. 7A. 36350 Nigran (Pontevedra - Spain)