Added to your wishlist
Removed from your wishlist
Create a new wishlist
New wishlist created successfully
Do you need more than 0 units? Please, contact us.
Product temporarily out of stock with these characteristics. Select another combination.
We notify you when it will be available:
Phrozen Pump & Fill - Automated resin feeder
Managing the tank's resin level can be challenging, especially with large prints or batches. This Pump & Fill device by Phrozen was designed to work together with the Sonic Mega 8K S printer to detect the level of resin in the printer's tank and refill it automatically when it's too low.
Running out of resin or overfilling the tank can complicate the cleaning process. With Phrozen's Pump & Fill system, there's no need for constant monitoring and manual refilling of the tank since the Pump & Fill system is going to do it with precision.
Moreover, the system efficiently pumps the remaining resin in the tank post-printing and transfers it back into the bottle. This not only prevents material wastage but also simplifies the cleaning process. The height of the resin bottle must be less than 210 mm and its diameter less than 90 mm.
It must be kept in mind that Pump & Fill is only compatible with the Phrozen Sonic Mega 8K S printer.
Resin management system for automatic resin monitoring and filling. Only for Sonic Mega 8K S.