> >>Bondtech LGX ACE Magnum+ printhead
Bondtech LGX ACE Mangum+ print head View larger

Bondtech LGX ACE Magnum+ printhead

BONDTECH-LGXACE-MAGNUM

BondTech

This product could be delivered in a longer time than the standard.

New product

388,00 €
388,00 €

Ask for information

Short filament path printhead ideal for both rigid and flexible materials.

Add to wishlist

The LGX ACE Magnum+ printhead is the result of a collaboration between Bondtech and Slice Engineering. It features Bondtech's LGX large gear extruder, and the Slice Engineering Mosquito Magnum+ bimetallic heatbreak and copper industrial grade hotblock. The complete list of elements includes:

  • The LGX large gears extruder.
  • The LGX ACE Magnum+ hotend:
    • 1x LGX black anodized aluminum cold block and heatsink with the signature ACE monolithic design (fixed position on the front of the printhead).
    • 1x LGX ACE Magnum+ hotend kit.
    • 1x Bondtech M6x1x7.5 coated brass nozzle 0.4 mm.

It must be kept in mind that no heater or thermistor are included in this printhead assembly.

With this printhead, the aim was to create an industrial-grade printhead that would work with rigid as well as soft and flexible materials, and the LGX ACE Magnum+ printhead does just that. The LGX extruder's special design offers a short filament path, and the Slice Engineering technology ensures improved thermal performance and melt flow capacity. The combination of those two features creates a printhead with a volumetric flow rate capacity significantly better than in the case of the Mosquito Magnum+ hotend alone. Furthermore, the Bondtech monolithic cold block and heatsink design guarantee increased heat transmission and dissipation (more efficient cooling).

The LGX ACE Magnum+ printhead only supports 1.75 mm filament and is compatible with the Bondtech standard brass, standard coated brass, and CHT coated brass nozzles, as well as the Slice Engineering BridgeMaster copper nozzle and the vanadium steel nozzle for abrasive filaments. The LGX ACE Magnum+ printhead is not compatible with the 3DSolex Matchless 1.75 mm nozzles.

Installing the LGX ACE Magnum+ printhead has numerous advantages. Apart from an increased flow (and faster printing with flexible materials) and a wide range of printable materials, this printhead offers a more efficient cool-down, it is easy to install and allows for one-hand nozzle change.

The assembly and setup instructions can be consulted here.

Hide color variations (Hide color variations)

The assembly instructions can be consulted here.

Manufacturer Bondtech
Diameter 1.75 mm
Compatibility (nozzles) Standard brass (Bondtech)
Standard coated brass (Bondtech)
CHT coated brass (Bondtech)
BridgeMaster copper (Slice Engineering)
Vanadium steel (Slice Engineering)
Content 1x complete printhead (heater or thermistor not included)
HS Code 8477.2

Accessories

30 other products in the same category:

Filament2Print © All rights reserved

DATIVIC S.L. CIF/VAT: ESB70460423

Pol. Ind. Porto do Molle. 7A. 36350 Nigran (Pontevedra - Spain)