ASA Green Grass View larger

ASA Green Grass

Fillamentum

New product

36 Items

22,15 €
22,15 €

Ask for information

Green ASA filament that combines mechanical strength, resistance to UV rays and water resistance.

ASA filament (Acrylate Styrene Acrylonitrile) is a thermoplastic that combines mechanical strength and resistance to UV rays, water resistance and great finish (not "yellow" with the passage of time). It is suitable for durable finishes for machinery or prototypes for use outdoors in the open parts as maintain the shape and color over time.

Image 1: 3d printed part with ASA.

ASA filament is more waterproof, more rigid and much easier to print the ABS (warping virtually no effect). Furthermore the ASA filament can be used in combination with soluble support materials to easily remove them. The ASA filament has a high dimensional stability and good chemical resistance. ASA filament was created with the intention of creating a similar ABS but with better weather resistance material.

ABSASA
Waterproof - +
Heat resistance + +
Cold resistance - +
UV resistance - + +
Chemical resistance - +
Machinable + + + +
FDA No No

This has allowed the use of this material were increased in the automotive industry as well as other outdoor applications. As a counterpart as ABS, ASA filament generates toxic fumes when printing so it is very important to print in a place with good ventilation.

Impact strength (KJ/m2) 44.1
Elongation at break (%) 35
Tensile strength (MPa) 40
Tensile modulus (MPa) 1726
Flexural strength (MPa) 62
Flexural modulus (MPa) 1814
Surface hardness 8
Softening temperature (ºC) 64
Machinable Machinable
UV resistance UV resistance
Moisture resistance Moisture resistance
Chemical resistance Chemical resistance

3D printing with ASA filament is easier than with the ABS filament. In the case of ABS filament it´s necessary that the print base is hot, between 80 and 110 ºC. In addition, the extruder temperature should be between 250 and 260 ° C. Although the ASA filament virtually not present the "warping" (which causes the first layer of the pieces off the base of the 3D printer) it is advisable to use Magigoo, BuildTak, Kapton Tape or 3DLac so that the pieces do not tend to come off base.

As for the interior temperature which is printed it is recommended to be controlled and there are no drafts. Finally remember to use your 3D printer in a well ventilated room, as fumes released during printing ASA filament aren´t entirely healthy.

General information
Manufacturer Fillamentum (Czech Republic)
Material ASA (Acrylonitrile Styrene Acrylate)
Format Pack of 50g
Spool of 0.75 kg or 2.5 kg
Density 1.07 g/cm3
Diameter of filament 1.75 or 2.85 mm
Diameter tolerance ±0,05 mm
Filament length ±291 m (Ø 1.75 mm-0.75Kg)
±649 m (Ø 1.75 mm-2.5Kg)
±110 m (Ø 2.85 mm-0.75Kg)
±366 m (Ø 2.85 mm-2.5Kg)
Color "Green Grass"
RAL/Pantone RAL 6010 / -
Print settings
Printing temperature 240-255ºC
Print bed temperature 90-105ºC
Chamber temperature Not necessary
Cooling fan Not recommended
Mechanical properties
Izod impact strength (ASTM D256) 441 J/m
Charpy impact strength -
Elongation at break (ASTM D638) 35% 
Tensile strength (ASTM D638) 40 MPa 
Tensile Modulus (ASTM D638) 1726 MPa
Flexural strength (ASTM D790) 62 MPa
Flexural modulus (ASTM D790) 1814 MPa
Surface hardness (ASTM D785) Rockwell 92
Thermal properties
Softening temperature (ASTM D648) 86ºC
Melting temperature -
Specific properties
Transparency  -
Additional Information
HS Code 3916.9
Diameter coil (outer) 200 mm (0.75 kg spool)
300 mm (2.5 kg spool)
Diameter coil (inner hole) 55 mm (0.75 kg spool)
53 mm (2.5 kg spool)
Coil Width 50 mm (0.75 kg spool)
100 mm (2.5 kg spool)


* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.

24 other products in the same category: