Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

PP Isplen pellets

Ref.: ISPLEN-PELLET-PP-720FV-1KG

18.90 €

Tax excl.

Format

Material

Quantity

In stock 4 units available for immediate shipping.
units available for shipping in 5 - 8 days Available for shipment within 5 - 8 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 22 November

Available

Returns

Ask about this product

The Isplen 720 FV and Isplen 800 FG pellets are advanced materials especially designed for the FFF (Fused Filament Fabrication) and FGF (Fused Granulate Fabrication) 3D printing technologies. They are both made out of polypropylene reinforced with fibers or minerals, and recyclable.

The 720 FV pellets are made of a high fluidity polypropylene reinforced with 30 % of fiberglass. This gives the pellets stiffness and impact strength at all temperature ranges, with low warping and shrinking. What’s more the Isplen 720 FV pellets are UV stabilized, which means that they are adequate for outdoor applications. The recommended processing temperature range for these pellets is 190-250 ºC but the processing conditions should be adjusted to each production line.

The 800 FG pellets consist of a highly processable polypropylene with a medium flow index, making it ideal for applications requiring both high mechanical strength and exceptional processability. These pellets ensure stability in the fabricated part, lending themselves to various applications across industries.

Both the 720 FV and 800 FG pellets are perfect for applications where the required properties are high mechanical strength, great processability and stability of the 3D printed part. Some example applications are:

Prototypes, jigs and fixtures, aesthetic parts in the automotive industry.
Prototypes in the aerospace industry.
Technical components in the textile, toy, footwear, jewelry and leisure industries.

Both these materials can be used directly as pellets, for example with the AM Flexbot System by CEAD, or processed into filament with the help of equipment such as the Filastruder Kit. The Isplen pellets can also be used with an injection molding machine such as the Robot Factory machine. The pellets' technical datasheet in the Attachments section discusses the properties of both variants when 3D printed and injected.

The Isplen 720 FV and 800 FG pellets are perfect 3D printing materials for demanding mechanical applications, including outdoor uses. Their recyclability constitutes an additional advantage, as it makes it an eco-friendly 3D printing material.

General information
Material	PP
Format	1kg / 5 kg / 25 kg
Density	- g/cm³

Mechanical properties
Izod impact strength	(ISO 179) 720 FV: 2 KJ/m² / 800 FG: - KJ/m²
Charpy impact strength	(ISO 179) 720 FV: - KJ/m² / 800 FG: 4 KJ/m²
Elongation at break	- %
Tensile strength	- MPa
Tensile modulus	- MPa
Flexural strength	- MPa
Flexural modulus	(ISO 178) 720 FV: 1000 MPa / 800 FG: 450 MPa
Surface hardness	-

Thermal properties
Melting temperature	- ºC
Softening temperature	(ISO 75) 720 FV: - ºC / 800 FG: 62 ºC
Processing temperature	240 ºC
MFR Ratio	(ISO 1133, @230 ºC/ 2.16 kg) 720 FV: 12 g/10 min / 800 FG: 20 g/10 min
Glass transition temperature	- ºC
Heat deflexion temperature	- ºC

Specific properties
Chemical resistance	✓

Other
HS Code	3901.1

Both the 720 FV and 800 FG pellets should be stored in a dry environment, at temperatures under 60 ºC and protected from UV radiation. Any other storing conditions will result in the pellets degrading, which could cause a migration of additives included in the pellets (mineral and fiberglass). This, in turn, may negatively influence the processability of the material and the quality and properties of the 3D printed part.

Both materials should be dried for about 2 hours at 80 ºC before use. Air cooling will result in a better surface finish of a part 3D printed with the Isplen 800 FG and 720 FV pellets.

For the 720 FV pellets, the use of a 0.6 mm nozzle or wear resistant nozzles is recommended due to the abrasiveness of fiberglass. Some examples of wear resistant nozzles are hardened steel nozzles, Vanadium nozzles, or the Olsson Ruby nozzle. Using a regular nozzle or a nozzle with a diameter smaller than 0.6 mm will result in the degradation of the nozzle walls and exit, resulting in a bad quality or failed impression.

There are a few ways to make sure no warping occurs when 3D printing with the Isplen 720 FV and 800 FG pellets. One of them is to use Kapton tape or the Magigoo PP stick in order to improve the adhesion of the material to the printing bed. Another way the risk of warping can be reduced is to protect the base layer of the part 3D printed with the Isplen 720 FV and 800 FG pellets by including a raft or a brim in the design. One more way of minimizing the risk of warping would be to use a printer with a heated chamber or with a heated bed. The recommended chamber temperature range is 55-90 ºC.