Brass and stainless steel nozzle - Raise3D
search
  • Brass and stainless steel nozzle - Raise3D
  • 0.2 mm stainless steel nozzle - Raise3D
  • Brass and stainless steel nozzle - Raise3D
  • 0.4 mm stainless steel nozzle - Raise3D
  • Brass and stainless steel nozzle - Raise3D
  • 0.6 mm stainless steel nozzle - Raise3D
  • Brass and stainless steel nozzle - Raise3D
  • 0.8mm stainless steel nozzle - Raise3D
  • Brass and stainless steel nozzle - Raise3D
  • 1 mm stainless steel nozzle - Raise3D
  • Brass and stainless steel nozzle - Raise3D
You must be logged in to manage your wishlist.

Brass, WS2 or hardened V3 steel nozzle - Raise3D

RAISE-NZL-BRASS-175-040
20.00 € 20.00 €
Tax excl.
Diameter
Diameter Nozzle
Material
Quantity

In stock 21 units available for immediate shipping.
units available for shipping in 0 - 0 days
Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 22 November

Raise3D has a range of brass and hardened steel nozzles for Pro2, Pro 3 and E2 3D printers:

Brass nozzle

The brass nozzle (0.4 mm) for Pro2 Series is ideal for printing conventional materials, such as PLAABS and PETG. The brass nozzle offers a superficial finish of high quality pieces. In addition, brass is a material with good heat dissipation, allowing it to make parts very quickly and at the same time with great quality.

Hardened Steel Nozzle

To take full advantage of the Pro2 Series 3D printer, Raise3D has developed hardened  steel nozzles (0.2 - 0.4 - 0.6 - 0.8 - 1 mm). Its resistance to wear is several times higher than brass nozzles, maintaining a good surface finish of the pieces made.

These types of nozzles allow the use of materials that contain all types of abrasive fibers (carbon and glass): Nylon - Carbon Fiber CF15, XSTRAND GF30-PA6, XSTRAND GF30-PP, XSTRAND GF30-PC, etc.

Steel nozzle with WS2 coating

To achieve maximum resistance to reinforced filaments and to optimise material flow, Raise3D has developed the WS2 coated steel nozzle. This nozzle is only compatible with the Raise Pro2 series, Raise Pro3 series and Raise E2 series.

The special coating on this nozzle gives the nozzle a very high hardness of 7.8 on the Mohs scale. This allows the user to 3D print with carbon fibre, glass fibre, metallic or ceramic filaments while maintaining excellent flow and durability.

The advantages of these nozzles over other nozzles are as follows:

  • Low coefficient of friction: Thanks to the WS2 coating, this nozzle has a lower coefficient of friction, which results in improved material flow.
  • Good lubrication and anti-abrasive performance: This nozzle has excellent performance using abrasive filaments, even when subjected to high temperatures (max. 450 ℃).

Nozzle with WS2 coating

Image 1: Nozzle with WS2 coating. Source: Raise 3D.

The WS2 coated steel nozzle is available in different output diameters, so the user can choose the one that best suits the application in question. The output diameters of this nozzle range from 0.40 mm to 0.80 mm and, like the previous nozzles, are compatible with 1.75 mm filament.

General information

Manufacturer Raise3D
Filament diameter 1.75 mm
Nozzle diameter 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm, 1.0 mm
Nozzle material Brass, hardened steel, WS2 coated steel
Compatibility Raise3D Pro2 serie / Pro3 serie / E2 serie

Other

HS Code 8477.9

After printing in 3D with filaments containing carbon, metal, wood, ceramic fibers ..., it is necessary to remove it and introduce the cleaning filament “Smart Clean”, to avoid subsequent jams.

The nozzle should be changed following the steps in the installation manual available in the "downloads" section.