Gel-Lay
search
Compare
You must be logged in to manage your wishlist.

Gel-Lay

GEL-LAY-175-R250
29.95 € 29.95 €
Tax excl.
Diameter
Format
Quantity

In stock 10 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Monday 16 September
Available

Gel-Lay is a new filament having a similar function to gelatin. This new filament is part of the new line of sparkling filaments (with a porous structure) called PoroLay. Composition of the filaments of the line PoroLay consist of two different materials; on one hand a functional component (TPE-elastomer) and the other a soluble component (PVA).

PoroLay line consists of four different types of filaments: LayFomm 40, LayFomm 60, FeltLay and Gel-Lay. (The first three have a foamy appearance and the last one gelatinous). Gel-Lay filament consists of a mixture of a PVA (soluble) and elastomeric rubber polymer. Therefore, part of this strand is water soluble. After rinsing the material in water, PVA component is dissolved and the rubber polymer remains a micro-porous appearance. As a gelatinous material (hence its name) offers multiple applications in the world of 3D printing to create soft objects. This duality between elasticity and water solubility of a part makes it an extremely versatile filament, being very suitable for use in biomechanics and objects in contact with water (especially designed for floating objects).

The printed object with Gel-Lay will be strong and rigid filament (although slightly flexible), but after wetting it with water becomes elastic object (micro-porous). Gel-Lay is one of the newest experimental strands today of 3D printing. This is the most innovative creation of Kai Parthy (creator of filaments as well known as the LayBrick, LayWoo-D3 or Bendlay among others). Gel-Lay filament is optimal for printing objects soft rubber due to deformation of negligible when printing. Importantly, the pores are not visible to the naked eye. Printed objects with Gel-Lay can moisten with water plus a multitude of liquids such as oil, glycerin, inks, saline solutions, ionic liquids or to be electrically conductive.

General information
Material TPU/TPE
Format 50 g / 250 g
Density 1.18 g/cm³
Filament diameter 1.75 / 2.85 mm
Filament tolerance ± 0.1 mm
Filament length (Ø1.75 mm, 250 g) 88.1 m/ (Ø2.85 mm, 250 g) 33.2 m

Printing properties
Printing temperature 235 ºC
Print bed temperature 20 - 80 ºC
Chamber temperature ✗
Cooling fan ✓
Recommended printing speed - mm/s

Mechanical properties
Elongation at break - %
Tensile strength - MPa
Tensile modulus - MPa
Flexural strength - MPa
Flexural modulus - MPa
Surface hardness -

Thermal properties
Softening temperature - ºC

Specific properties
Transparency ✗

Other
HS Code 3916.9
Spool diameter (outer) 200 mm
Spool diameter (inner hole) 125 mm
Spool width 30 mm

To print with Gel-Lay filament is not necessary to have a warm bed in the 3D printer. Although to get a better impression you can put warm bed up to 80ºC. It´s essential to use Kapton Tape or BuildTak. For maximum flexibility of the printed object it is recommended that part or object immersed in a container of water from one to four days. The effect of PVA solution component and the other part of the gelatinous transformation begins to be clearly seen after immersed one day. If you want to reduce the time the object immersed in the liquid to print fewer walls (Shell) and less filling percentage. It can also accelerate dissolution of the PVA if shaken occasionally workpiece.

The recommended print temperature is 225 °C to 235 °C. All components of the filament Gel-Lay are harmless and safe.

Masterspool format

The 250 g. format of the Gel-Lay filament can sometimes cause problems during the printing process because it does not include a spool that helps the correct supply of material from the 3D printer.

To avoid this type of problem when printing this and other filaments that are sold in masterspool format you can use a variable spool holder. Thanks to the use of this device, all kinds of tangles and overlaps derived from the absence of a spool are largely avoided.

Featured properties

Printing temperature
235 ºC
Filament diameter
1.75 / 2.85 mm
Density
1.18 g/cm³

Related products