Baño de ultrasonidos Zetadebind
search
You must be logged in to manage your wishlist.

Zetadebind ultrasonic bath

ZETAMIX-ZETADEBIND
325.00 € 325.00 €
Tax excl.
Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 14 - 20 days
Available for shipment within 14 - 20 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Tuesday 7 January - Wednesday 15 January

In recent years, the emergence of ceramic and metallic powder filled filaments that allow ceramic or metallic parts to be obtained at low cost through heat treatment has revolutionised FFF 3D printing, thanks to filaments from manufacturers such as Nanoe and The Virtual Foundry..

However, one of the main drawbacks until now was the lack of availability of affordable debinding and sintering equipment.

Printed metal and ceramic parts

Image 1: Parts printed with metal and ceramic filaments after sintering. Source: Nanoe

Nanoe is a renowned French company founded in 2008 and specialised in the production of innovative materials. It stands out mainly in the production of ceramic powders, with a production capacity of more than 100 tons of high purity ceramic powder per year.

Video 1: Meet Zetamix By Nanoe. Source: Nanoe.

Nanoe offers a range of ceramic filaments for industrial applications that enable all-ceramic end parts to be produced in three simple steps:

  • Printing: Zetamix ceramic filaments require printing temperatures between 150 and 180 ºC and a base temperature of 40 ºC, so they can be easily printed on virtually any direct extruder printer.
  • Debinding: Debinding is the stage in which the polymer binder is removed. It consists of two stages, one chemical and one thermal.
  • Sintering: By means of a thermal treatment, the ceramic powder is sintered until a fully ceramic part is obtained.

pack

Image 2: Equipment needed to obtain ceramic pieces with Zetamix filaments. Source: Nanoe

In order to be able to successfully perform the debinding and sintering stages, Nanoe offers two affordable products:

  • Zetadebind, an ultrasonic bath that facilitates the chemical debinding stage.
  • Zetasinter, a high-temperature tubular furnace that allows the thermal debinding stage, the sintering stage and any other heat treatment to be applied to the final metal or ceramic part.

Zetadebind is an ultrasonic bath designed to facilitate the chemical debinding stage of Zetamix filaments. It is a temperature-controlled ultrasonic bath with a capacity of 6.5L.

It is capable of providing ultrasonic vibrations at a frequency of 40 kHz and with a power of 180 W, which facilitates rapid dissolution of the binder in the acetone. In addition, it can work at temperatures between 20 ºC and 80 ºC.

Thanks to Nanoe's solutions, ceramic 3D printing is more accessible and affordable than ever.

General information

Manufacturer Zetamix

Machine properties

Ambient operating temperature 20 - 30 ºC
Working dimensions 300 x 155 x 150 mm / 6.5 L
Frequency 40 KHz
Time control 0 - 20 min
Temperature control 20 - 80 ºC

Electrical properties

Consumption 450 W

Dimensions and weight

Dimensions 330 x 180 x 310 mm
Weight - Kg

Other

HS Code 8477.59

During the debinding process, Zetadebind uses acetone which is continuously evaporating. This is why the chemical debinding process must be carried out inside a chemical fume cupboard or under a suitable extraction system, both equipped with a chemical filter. The extraction capacity should be at least 240 m3/h.

The solvent used, acetone, is highly flammable and must be handled and stored properly.