Filatecniko TPU granito
search
Compare
You must be logged in to manage your wishlist.

Filatecniko TPU granite

FILATECNIKO-GRANITE-175-750
19.42 € 19.42 €
Tax excl.
Diameter
Format
Colour
Quantity

In stock 2 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Thursday 5 December
Available

Tecnikoa is a Spanish manufacturer of FDM 3D printing filaments. Currently, Tecnikoa produces only TPU-based flexible filaments with a degree of rigidity that allows them to be easily printed with any FDM 3D printer, whether it has a direct or Bowden type extruder.

TPU (Thermoplastic Polyurethane) is a thermoplastic, more specifically a linear elastomer polymer belonging to the polyurethane family. This material is characterised by its high resistance to abrasion, certain chemicals, UV radiation and low temperatures. This set of properties makes the use of TPU widespread throughout the industry.

Easy Print Technology

Filatecniko® granite filament is a flexible TPU-based filament with excellent physical and mechanical properties. Its 90 Shore A hardness offers unprecedented ease of printing among flexible filaments on the market. In addition, its printing temperature ranges from 195 to 205°C, allowing the material to be printed on almost any FDM 3D printer on the market.

Piece printed with Filatecniko Granite

Image 1: Piece printed with Filatecniko® granite. Source: Tecnikoa.

Stone effect finish

Undoubtedly, Tecnikoa filaments always have a differentiating factor. In the case of Filatecniko® granite, its stone effect finish stands out, which contrasts with the flexibility of the material. 

There are several PLA filaments with wood effect or stone effect finishes, such as PLA Stonefil or PLA EasyWood. Filatecniko® granite is the first flexible filament to offer this appearance, as it contains small particles that give it a marbled effect reminiscent of stone or marble.

Thanks to its original finish, Filatecniko® granite filament is an ideal material for the production of decorative pieces or fashion accessories, but thanks to its mechanical properties it can also be used for technical applications.

General information
Material TPU/TPE
Format 50 g / 750 g
Density - g/cm³
Filament diameter 1.75 mm
Filament tolerance ± 0.03 mm
Filament length -

Printing properties
Printing temperature 195 - 210 ºC
Print bed temperature 40 ºC
Chamber temperature -
Cooling fan -
Recommended printing speed 20 - 70 mm/s

Mechanical properties
Elongation at break - %
Tensile strength - MPa
Tensile modulus - MPa
Flexural strength - MPa
Flexural modulus - MPa
Surface hardness -

Thermal properties
Softening temperature - ºC

Specific properties
Transparency -

Other
HS Code 3916.9
Spool diameter (outer) 200 mm
Spool diameter (inner hole) - mm
Spool width 80 mm

It is recommended to use Magigoo, 3DLac or BuildTak on the base of the 3D printer so that the first layer of Filatecniko filament adheres properly. The recommended printing temperature is between 215-250°C, and the recommended printing speed is 20 - 60 mm/s. The recommended shrinkage would be 3.5 - 6.5 mm for Bowden type extruder and 0.8 - 1.5 mm if using a direct extruder.

In case of printing problems due to slippage of the filament in the extruder head, it is advisable not to use retraction and to increase the flow rate in case of intermittent extrusion. For small parts, it is also advisable to always print without retraction and with the layer fan running.

TPU is a very hygroscopic material and therefore tends to absorb moisture. Once printing is finished, it is advisable to store the spool in an airtight bag. If the spool has not been stored properly, i.e. exposed to moisture, it is advisable to dry it in a filament dryer such as Printdry.

Featured properties

Printing temperature
195 - 210 ºC
Filament diameter
1.75 mm

Related products